Where is the Brake Controller Plug on my 2019 Chevrolet Silverado 1500 LD

Question

Question:

I have a 2019 Chevrolet Silverado LD LT. It has a Female plug in mounted under the dash almost directly centered with the steering column. I do not see any plugs that look like they will fit this.

asked by: Jim T

0

Expert Reply:

The factory brake controller port on your 2019 Chevy Silverado 1500 LD is in your vehicle's junction box underneath the dash, to the left of the steering column. The Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3064-P is actually not the part you need for your Silverado 1500 LD. That adapter is for the new body style Silverado. The adapter you need is part # 3016 which is for the older body style including the LD version of your 2019 Silverado. I attached a video install on a 2017 Silverado that will show you where the box is on your 2019 Silverado LD because they are the same body style.

expert reply by: Colin H

0

click to enlarge

Answer 1

No, The Tekonsha Plug-In Wiring Adapter #3016-P will not fit your 2022 Chevrolet Silverado 1500. You will need The Tekonsha Plug-In Wiring Adapter #3064-P. This adapter is compatible with the Tekonsha Prodigy P3 Brake Controller #90195. I attached…

view full answer...

Answer 2

For your 2022 Chevrolet Silverado 1500 we list it as a towing package while Chevrolet lists it as a trailering package. Since different manufacturers use different terms we selected to term towing package for all of our different vehicles. I…

view full answer...

Answer 3

If your current awning is a 16 foot awning you can use this replacement #LCV000334402. This is compatible with Solera, Dometic A&E, and Carefree of Colorado awnings. Dometic A&E make the Sunchaser Awning Model #834AV18.401

view full answer...

Answer 4

On your 2006 Chevy Silverado 1500 there is a black junction box at the back of the floorboards and to the left of the brake pedal. If you take that cover the brake controller plugs into the top row, second spot from the left. It will be the same as…

view full answer...

Answer 5

If your Parallax 6300 Q-series is no longer charging your batteries you'll need to replace the unit. The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V is the correct replacement for you. The Integrated…

view full answer...

Answer 6

The Plug-In Wiring Harness #3064-P that you referenced is the correct brake controller harness for your 2019 Chevy Silverado 1500 and it is actually a brand new product for this generation of GM trucks (it currently only fits the 2019 model Silverado…

view full answer...

Answer 7

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 8

The plug for a brake controller on your 2020 Chevy Silverado 1500 will be located up under your driver's side dash on the left side (see attached). This is where you will plug in an adapter like the Tekonsha #3064-P for a brake controller like…

view full answer...

Answer 9

The wiring harness that you need is part #3016. One end plugs into the P3 brake controller, part #90195, and the other end plugs into the connector under the dash of your 2019 Chevy Suburban. Since you have the tow package you'll have that…

view full answer...

Answer 10

The correct weight distribution system for your 2015 Chevrolet Equinox and Sunset Park Sun-Lite 16BH is going to need to be based off of the total tongue weight. The total tongue weight is calculated by adding the loaded ready to tow tongue weight of…

view full answer...

Answer 11

There are a number of high-quality weight distribution hitches that will work with a 400 lb tongue weight such as the Equal-i-zer #EQ37060ET, which is rated for total tongue weights between 300 and 600 lbs. However, in order to choose the best weight…

view full answer...

Answer 12

To install the Redarc Tow-Pro Elite #RED44FR on your 2019 Chevy Suburban you need the adapter #3016-S. This installs into the connector that you found under your driver's side dash and comes with loose wires on the other end that you splice to…

view full answer...