Is Draw-Tite Hitch Hidden Like Curt Hitch for 2020 Subaru Crosstrek

Question

Question:

In the past I usually buy Draw-Tite hitches because I'm familiar with them but I like the hidden design of the Curt that I see. Does DT have one like that for my 2020 Crosstrek?

asked by: Tracy R

0

Expert Reply:

The hidden design of the Curt hitch # C12184 is very appealing and since Draw-Tite actually doesn't have a hidden crosstube design for your 2020 Subaru Crosstrek I definitely recommend going with it over the Draw-Tite # 36644. Curt has a great reputation when it comes to trailer hitches and we have actually found that their hitches tend to have better welds and a thicker powder coat which combined means they hold up better than the Draw-Tite versions.

I would like to point out that the hitches you are looking at have 1-1/4" receivers. While this isn't a bad thing, 1-1/4" receivers do limit you to a smaller selection of accessories. Curt does offer the same hitch with a 2" receiver as part # C13382 but if you like the look of the Curt I recommend going with the etrailer Trailer Hitch # e98912 instead because it has the same basic design but it boasts a matte black finish that looks better and holds up longer than the classic glossy black finish of other hitches.

We do have another option of hidden hitch that you may be interested in but it is a little different than your traditional hitch. The Stealth Hitches Trailer Hitch # 391SUCT18 features a removable receiver so that your Crosstrek looks like it doesn't even have a hitch installed. The catch to this option though is that it is more of an elite design so the price reflects that, plus the receiver can only be used for accessories, not for towing. If you're looking into the towing side of things you need the Stealth Hitches Kit # 391SUCT18T which comes with the receiver, ball mount, and wiring kit.

Installation videos and instructions have been linked for you to check out.

expert reply by: Jon G

0

click to enlarge

Answer 1

In looking at the 2023 Subaru Crosstrek it is unchanged from the previous 2022 model year that the Curt Trailer Hitch Receiver #C13382 fits. I recommend installing the T-One Vehicle Wiring Harness #118467 so you will be able to add Auxiliary Lights…

view full answer...

Answer 2

I've attached some photos so you can see how the #e98912 is going to look like after you install it on your 2020 Subaru Crosstrek Limited. These photos were submitted by another Crosstrek Limited owner who confirms it's a perfect fit and as…

view full answer...

Answer 3

Standard tapered trailer wheel bearings are recommended to be re-packed with fresh bearing grease about every year or every 12,000 miles under normal use. In certain conditions this interval could be shorter, such as if you routinely tow the trailer…

view full answer...

Answer 4

The etrailer.com Trailer Hitch Receiver part #e98912 which is a fit for your 2019 Subaru Crosstrek uses 1/2" carriage bolts. In some cases, you will need to slightly enlarge the frame holes in order to use this bolt size. That said, there is no…

view full answer...

Answer 5

Deciding between flat towing your vehicle with all four wheels down or using a tow dolly partly boils down to your preference and application. For your Jeep Wrangler, I recommend going with a flat towing setup. This is going to be simpler to…

view full answer...

Answer 6

The most hidden hitch we offer for your 2022 Subaru Crosstrek is the etrailer part #e98912 which only has the hitch opening hanging below the rear bumper. This helps make it less visible as well as helps with ground clearance. I attached a picture of…

view full answer...

Answer 7

I don't recommend changing the hardware or installing the Curt #C13382 in any other manner than what's shown in the instructions. Swapping out the bolts for ones with a smaller head could affect the strength of the installation. The easiest…

view full answer...

Answer 8

For a hitch for towing with your 2022 Subaru Crosstrek I recommend the etrailer Trailer Hitch Receiver #e98912. This is a Class III hitch that uses a 2" receiver. It has a square-tube design and a concealed cross tube to help maintain a factory…

view full answer...

Answer 9

The hitches we offer for your 2021 Subaru Crosstrek like the #C13382 do not come with trailer wiring so you would need to order that separately with the Tekonsha kit part #118467 which is the easiest to install and the most reliable. I attached an…

view full answer...

Answer 10

The Curt #C13382 and etrailer #e98912 hitches for your 2022 Subaru Crosstrek have the same construction, capacities, and design, but the big difference is that the Curt hitch has the classic glossy finish while the etrailer hitch has a matte black…

view full answer...

Answer 11

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

view full answer...

Answer 12

As a petite 5'2" Ecuadorian girl, I can totally relate, so I'm happy to make a recommendation! Based on my research, your 2020 Tesla Model 3 factory roof rack system has a crossbar spread of 28 inches. This means that both the Thule…

view full answer...