Torklift Camper Tie Down Fit Recommendation for 2019 Ram 3500 Long Bed Dually

Question

Question:

what frame mounted brackets do I need for my 2019 3500 Ram daully 8 foot box with factory cab length running boards

asked by: Tim

1

Helpful Expert Reply:

The correct Torklift frame mounted camper tie downs for your 2019 Ram 3500 dually with an 8 foot bed, and factory cab length running boards is the # TLD2140 and # TLD3112.

If you're looking for turnbuckles to I also recommend the # TLS9529-2-LK for a stainless steel option.

expert reply by: Jameson C

1

Answer 1

Yes you can absolutely use the HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs #LC182895 with your TorkLift tie downs.

view full answer...

Answer 2

Did you try the longer rear hooks in the front position of the #LC182895? If those were long enough they are available separately with #LC182896.

view full answer...

Answer 3

Unlike other hitch extenders you do not need to use any type of support chain with the Reese Titan Hitch Extender part #RP45292. This is true for the 24 inch length or the 34 inch length.

view full answer...

Answer 4

Because you are using the TorkLift Front #TLD2140 and Rear #TLD3113 frame mounted Tie-Downs you are going to want to use their Turnbuckles #TLS9529-2-LK. This is due to the length of them as the Happy Jack #LC182898 have shorter turnbuckles due to…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

Gen-Y's calculation for pin weight is a safe guess, but isn't the most accurate so the only way you'll get the correct capacity Gen-Y 5th Wheel Pin Box is to fully load the trailer and go to a commercial scale to measure the pin weight.…

view full answer...

Answer 7

Welcome back! You do not need to cut anything away! So long as your 5" of clearance was measured with your trailer loaded and resting on the suspension you will be good. The SumoSprings Trailer Helper Springs item #SS26MV include spacers that…

view full answer...

Answer 8

Hi Robert, The Curt Pintle Hook #C45908 would require that your EZ Loader boat trailer has a lunette ring for the coupler. From what I can see the 26-30ET should have a surge brake coupler that would couple to a standard ball mount. You'll need…

view full answer...

Answer 9

As long as the RBW Lil' Rocker mounts to industry standard base rails you'll need the Curt Adapter Rails #C29BR that fit in the OEM puck system on your 2019 Ram 2500 and give you a standard base rail connection. I'm attaching a photo…

view full answer...

Answer 10

So for your set up, a 2021 Ram 2500 short bed with the RamBoxes, you will need to use a Sidewinder in order to have the clearance to tow a 5th wheel. The Goose Box doesn't move the pivot point and an offset ball just won't be enough for…

view full answer...

Answer 11

The Air Lift LoadLifter 7500 XL Air Helper Springs #AL57531 will fit your 2022 Ram 3500 Mega Cab with single rear wheels. This is the extra heavy duty 7,500 lb kit so it is most commonly used on dually trucks, but it will fit single rear wheel models…

view full answer...

Answer 12

Yes, the Curt CrossWing Lightweight Gooseneck-to-5th-Wheel Trailer Hitch Adapter #C32DR will work with the OEM puck system on your 2016 Ram 2500. Do understand since you do have the short bed you will likely not be able to make full jackknife turns…

view full answer...