Trailer Hitch Receiver Options for 1989 Chevy K2500 Long Bed

Question

Question:

I need options for my 89 k2500 with a 37 frame. It has tags on the frame with WF if that makes a difference. Its a 1989 k2500 long bed with regular bumper. About 6 deep with the built in hitch ball.

asked by: David B

0

Expert Reply:

The best option for a trailer hitch receiver on your 1989 Chevy K2500 long bed is the Draw-Tite Max-E-Loader Trailer Hitch Receiver # 41524.

I like this one because it is designed as a custom fit for your truck and the cross tube is mostly hidden. It has a 6,000 lb towing capacity and 600 lb tongue weight capacity.

Keep in mind it will NOT fit if your truck is a Crew Cab.

expert reply by: Kyle S

0

click to enlarge

Answer 1

The problem with putting a gooseneck hitch in a truck with a body lift is that the gooseneck hitch mounts to the frame, and as you know a body lift will lift the body higher off of the frame. Well, a gooseneck hitch installs onto the frame and the…

view full answer...

Answer 2

I have a solution for you, but the Curt Class III Trailer Hitch, #C13029, that you referenced will not fit the 1997 Chevrolet K1500 truck. If your truck has the standard or step bumper, then the Curt Class III Trailer Receiver Hitch, #C13042, will…

view full answer...

Answer 3

The only difference between the Flat and Radius end slipper springs is the shape of the end of the spring with the radius having an arch and the flat being flat as you can see in the included pictures of the Radius End #SP-179275 and Flat End…

view full answer...

Answer 4

According to my contacts at Curt Manufacturing, if the spare tire on your 1991 GMC pickup is the stock size, the spare tire might need to be slightly repositioned toward the front of the truck. This is a simple process. Remove spare, and install…

view full answer...

Answer 5

I do have an option however it will require a new trailer hitch receiver. There is no adapter to go from a bumper hitch ball to a lower height. I recommend the Draw-Tite Max-E-Loader Class III trailer hitch receiver #41524. There is no drilling…

view full answer...

Answer 6

All of the hitches you referenced with the exception of part #13028 have been confirmed to fit your 1992 Chevy Pickup. The rest, part #41524, #75033 , and #75099 have all been confirmed as a fit. The main difference between Draw-Tite trailer hitches…

view full answer...

Answer 7

I attached a picture that has all of the dimensions of the Curt trailer hitch part #13573 that you referenced. I also attached an install video for you to check out as well.

view full answer...

Answer 8

I have a solution for you, but the Curt Multi-Fit Hitch #C13900 is not a confirmed fit on your 1992 F-150. If you have a standard bumper on your F-150 you can use the Curt #14001 and if you've got a deep-drop bumper you'll want to use the…

view full answer...

Answer 9

The Draw Tite hitch part #41524 is a confirmed fit for a replacement for your 1995 Chevy K1500 pick up truck.

view full answer...

Answer 10

The best way to tell if your 1989 Chevrolet K1500 is a Heavy-Duty (HD) or Light-Duty (LD) version would be to obtain your VIN and call the dealer as they would be able to tell you whether or not you have the HD or LD version. Another way to tell if…

view full answer...

Answer 11

We have hitches that fit your 1985 Chevy C10 that has a deep bumper with the Curt hitch part #C13099. Your setup would definitely not be too low to tow with. A rise ball mount would make up for a lower hitch as well. I attached a help article

view full answer...

Answer 12

I spoke with my contact at Curt about hitch #C13902. The overall width is approximately 41-1/2 inches. The bolt holes are approximately 39-1/2 inches apart on center.

view full answer...

Trailer Hitch Receiver Options for 1989 Chevy K2500 Long Bed

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching