Totally Hidden Trailer Hitch that Fits 2020 Subaru Crosstrek

Question

Question:

Do you guys have a hidden hitch that fits my 2020 Subaru Crosstrek?

asked by: Thomas

0

Expert Reply:

We have the the very hidden Stealth hitch part # 391SUCT18T that fits your 2020 Subaru Crosstrek. This hitch is completely hidden when not in use as the lower hitch opening is completely removable. This also comes with trailer wiring and a ball mount attachment so you'd be totally set with just the part # 391SUCT18T .

expert reply by: Jameson C

0

Answer 1

Curt recommends the stabilizer strap with non-supported loads like bike racks to help support the hitch when going over bumps to prevent some of the vertical shock from being transferred to the hitch. Curt does this as a precaution, it's not that…

view full answer...

Answer 2

The difference between the EcoHitch #306-X7365 and the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit - Custom Fit - 2" #391SUCT18T is that the Stealth hitch comes with everything you'd need to tow a trailer including the hitch…

view full answer...

Answer 3

We have quite a few installation videos for your 2021 Subaru Crosstrek but sadly none for the Stealth Hitches item #391SUCT18T. I have a better recommendation for a hitch for your Crosstrek. This one has an installation video, will offer you the same…

view full answer...

Answer 4

The EcoHitch part #306-X7365 that you referenced weighs 36 lbs. When you install an aftermarket part on your vehicle like a trailer hitch in this case, you are protected by the Magnuson–Moss Warranty Act. This act states, in part, that unless the…

view full answer...

Answer 5

The hidden design of the Curt hitch #C12184 is very appealing and since Draw-Tite actually doesn't have a hidden crosstube design for your 2020 Subaru Crosstrek I definitely recommend going with it over the Draw-Tite #36644. Curt has a great…

view full answer...

Answer 6

The primary differences between the EcoHitch #306-X7365 and the Curt #C13382 Class III hitches are their appearance once they've been installed and their price. The hitch capacity is identical and the install procedure is very similar between the…

view full answer...

Answer 7

In the USA a tandem axle utility trailer with a gross vehicle weight rating (GVWR) of 7500-lbs should have brakes installed. Any trailer over 3000-lbs must have brakes on all wheels in most states, but laws do vary. Some states require braked axles…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 11

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Totally Hidden Trailer Hitch that Fits 2020 Subaru Crosstrek

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching