Replacement Mounting Brackets for Westin Nerf Bars on 2006 Dodge Quad Cab Truck

Question

Question:

well kit 23-0500-23-0505 fit dodge 2006 quad door truck -door arent much different in doors AS long bolt up to cap mounts the same had 2004 dodge son wrecked truck yard took off bars for me but not hardware have to find replacements any help be great THANKS

asked by: ED.CHISHOLM

0

Expert Reply:

Since the nerf bars are designed to fit specific vehicles, you'll need a specific mounting kit for the bars more than one for the vehicle. The good news is that the 2004 and 2006 Dodge Ram Quad Cab both used the same bars.

If you have the Westin Nerf Bars # 23-0500 or # 23-0505 you can use the Replacement Mounting Brackets # 23-050PK , but it doesn't appear that those are the correct bars to fit either of those trucks. Instead, the correct Westin nerf bars that are designed to fit the 2004 and 2006 Dodge Ram Quad Cab pickup are the Westin E-Series 3" Round bars # 23-2310 ; or the Westin Platinum Series 4" Round bars # 21-2310 .

For the 3" round bars you'll need part # 23-231PK and for the 4" Platinum Series bars you'll use # 21-231PK to mount your bars on your 2006 Dodge Ram Quad Cab truck.

expert reply by: Erik B

0

Answer 1

The correct replacement hardware for your Westin E-Series Round Nerf Bars - 3" - Polished Stainless Steel #23-1680, is the Replacement Hardware for Westin E-series Step Bars #23-168PK.

view full answer...

Answer 2

The Aries Round Nerf Bars - 3" Diameter - Polished Stainless Steel #AA204018-2 are rated for a static weight of 500 lbs according to my tech contact at Aries.

view full answer...

Answer 3

Yes, what you need is the part #23-050pk. This is the replacement hardware for the #23-0500 bars you have that will fit your 1992 GMC truck.

view full answer...

Answer 4

From the center of the tube to the center of the tube for the Westin E-Series Round Nerf Bars #23-0500 is measures 48" but then the overall length is 51". Please note that this is designed to fit various models of Yukon, Tahoe,…

view full answer...

Answer 5

For your 1996 Chevy K2500 with a step bumper the B and W Hitch part #BWHDRH25124 is a confirmed fit. The distance between the mounting holes left to right is 34-1/2 inches. The spare will need to be temporarily moved to install this but it will be…

view full answer...

Answer 6

I'd recommend the Curt Class IV hitch, part #C14081. When installed, the hitch will sit pretty tightly to the underside of the rear bumper, as would the Draw-Tite #41901 you looked at, but the Draw-Tite model only fits the long bed model truck.…

view full answer...

Answer 7

If your Westin E-Series bars are 3 inches in diameter (which they should be), you'd need the #23-232PK bracket kit. This kit is compatible with #23-2320 and the #23-2325 E-Series step bars. I've linked you to a video showing a typical…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...