Weight Capacity of Aries Round 3 Inch Diameter Nerf Bars

Question

Question:

I need weight limits for the nerf bars #AA204018-2

asked by: Harrell

1

Helpful Expert Reply:

The Aries Round Nerf Bars - 3" Diameter - Polished Stainless Steel # AA204018-2 are rated for a static weight of 500 lbs according to my tech contact at Aries.

expert reply by: Jason S

1

Answer 1

Since the nerf bars are designed to fit specific vehicles, you'll need a specific mounting kit for the bars more than one for the vehicle. The good news is that the 2004 and 2006 Dodge Ram Quad Cab both used the same bars. If you have the Westin…

view full answer...

Answer 2

Yes, what you need is the part #23-050pk. This is the replacement hardware for the #23-0500 bars you have that will fit your 1992 GMC truck.

view full answer...

Answer 3

From the center of the tube to the center of the tube for the Westin E-Series Round Nerf Bars #23-0500 is measures 48" but then the overall length is 51". Please note that this is designed to fit various models of Yukon, Tahoe, Blazer, and…

view full answer...

Answer 4

For your 1996 Chevy K2500 with a step bumper the B and W Hitch part #BWHDRH25124 is a confirmed fit. The distance between the mounting holes left to right is 34-1/2 inches. The spare will need to be temporarily moved to install this but it will be…

view full answer...

Answer 5

I'd recommend the Curt Class IV hitch, part #C14081. When installed, the hitch will sit pretty tightly to the underside of the rear bumper, as would the Draw-Tite #41901 you looked at, but the Draw-Tite model only fits the long bed model truck.…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...