Comparing Trailer Hitch Options for 2020 Toyota Sienna

Question

Question:

Just got a 2020 Toyota Sienna and I'm looking for a trailer hitch to use a 4 bike rack. Your vehicle fit list is a great tool but there are still a lot of choices. Are there any differences and which one would you recommend for my situation?

asked by: Amy

0

Expert Reply:

There are a handful of trailer hitches that fit your 2020 Toyota Sienna and they can be broken down into a few categories. Since you are wanting to use a 4-bike rack you need at least a 2" Class III receiver so you are just looking at visible crosstubes and concealed crosstubes. The visible crosstubes include the Draw-Tite # 75237, Curt # C13105, and etrailer.com # e98837 while the concealed options include Draw-Tite # 76112, Curt # C13343, and etrailer.com # e98853.

I recommend the etrailer.com Trailer Hitch # e98853 because of the concealed crosstube (for a clean look) and it is the only one with a matte black finish which does a great job at hiding any scratches or dings that would be the result of flying road debris. I have attached a few photos and an installation video of this on a 2019 Sienna that you can reference.

If you don't already have a bike rack then I highly recommend the Yakima FullSwing # Y02465 because it has the ability to swing away from your Sienna which gives you full access to your rear hatch area without having to remove your bikes or the bike rack. Aside from that the next best features are the bike and rack locks plus the ability to adjust and lock the cradles in place. Just keep in mind that if any of your bikes lacks a horizontal top tube you will need the Adapter Bar # Y02531 to keep them level. I have attached a review video of this bike rack for you to check out.

expert reply by: Jon G

0

Answer 1

If you are looking to have a hitch installed on your 2020 Toyota Sienna that would indicate that you don't have the factory tow package since that would have been included. For a hitch the mostly hidden Draw Tite #76112 is a really great…

view full answer...

Answer 2

The etrailer Trailer Hitch Receiver part #e98853 is what I recommend for a 2020 Toyota Sienna (All Models). I checked with the manufacturer and verified that there will be no issues on a Limited Premier with AWD. The etrailer Trailer Hitch Receiver…

view full answer...

Answer 3

The etrailer.com Trailer Hitch Receiver part #e98853 is a great choice for the 2020 Toyota Sienna but it does require some under body trimming during installation like you mentioned. The under body panel will need to have a 4" by…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Comparing Trailer Hitch Options for 2020 Toyota Sienna

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching