Comparing Trailer Hitches For 2019 Honda CR-V

Question

Question:

I see that there are a few different trailer hitches for my 2019 Honda CR-V, the draw-tite, curt and etrailer hitches. I can't really tell exactly what the difference is between these three hitches so would you be able to compare them? Any info you can give would be great. Thanks!

asked by: Alex R

0

Expert Reply:

So there are a few important differences between the Draw-Tite Trailer Hitch # 76128, Curt Trailer Hitch # C13397 and etrailer.com Trailer Hitch # e98848 that fit your 2019 Honda CR-V, which I'll go over for you.

The first difference is the look; as you can see by the accompanying photo, the Curt and etrailer hitch have a concealed crosstube while the Draw-Tite has an exposed crosstube. What that means is the tube (the main body) of the Draw-Tite hitch is going to be visible while the Curt and etrailer's is not, and a concealed hitch is something a lot of people really like for style reasons.

Another difference is that the Curt and etrailer hitch both require fascia trimming during the installation, making the Draw-Tite does not, so the Draw-Tite hitch an easier install. Finally, maybe the biggest difference is that installing the Curt and etrailer hitches mean you lose the Hands-Free Liftgate feature unless you get a sensor relocation kit from a Honda dealer. You will NOT lose this feature when installing the Draw-Tite hitch. So really your choice comes down to this:

- Concealed Crosstube/Better Overall Look: Curt Trailer Hitch # C13397 or etrailer.com Trailer Hitch # e98848
- Easier Install/Keep Hands-Free Liftgate: Draw-Tite Trailer Hitch # 76128

I have added links to install videos of these hitches on a '19 CR-V for you to check out. I also wanted to mention, if you were going to be doing some towing and needed a wiring harness the correct fit for a 2019 CR-V is the T-One Vehicle Wiring Harness # 118741, and I've linked an install video of this harness for you as well.

expert reply by: Kyle S

0

click to enlarge

Answer 1

The etrailer.com Trailer Hitch Receiver #e98848 does require some fascia to be trimmed during installation (it's what allows for the hitch's sleek hidden design) and I can absolutely help you with this process. I have attached an…

view full answer...

Answer 2

The best trailer hitch for your 2018 Honda CR-V Touring with the hands-free tailgate is the Curt, part #C13397. I prefer the Curt over the Draw-Tite hitch, part #76128, because the Curt's crossbeam is completely hidden behind the…

view full answer...

Answer 3

Honda offers a Power Liftgate Sensor Relocation Bracket as part #08U59-TLA-100A for your 2019 Honda CR-V for when you install a hitch like the Draw Tite part #76128 so that the hands free lift gate will still function properly. That said,…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

We do have a roof rack that will work for your 2015 Honda CR-V. What we have found is that you cannot have factory side rails added to a vehicle after it has been delivered but we have a solution for you. I recommend the Rhino-Rack Vortex Roof Rack.…

view full answer...

Answer 6

If you install the Draw-Tite Max-Frame Trailer Hitch Receiver #76128 on your 2018 Honda CR-V you will still be able to utilize the hands-free liftgate but you will need to kick to the left or right of the receiver instead of just swinging your foot…

view full answer...

Answer 7

We have found out that when you install the Draw Tite hitch part #76128 on a 2018 Honda CR-V like yours you will need to remove the bumper and move the backup sensor 7 inches to the right to allow it to work after the hitch is installed since it…

view full answer...

Answer 8

First let's start with the hitch for your 2019 Honda CR-V... for that the etrailer hitch part #E98848 is the way to go as it has a concealed crosstube which means it will be mostly out of plainsight. It's also made in the USA unlike the Draw…

view full answer...

Answer 9

While not ideal to so after installing Trailer Hitch Receiver, #e98848, you should be just fine.

view full answer...

Answer 10

A stabilization strap like the Curt Cam Buckle Stabilizing Strap #18050 is sometimes used for additional support using bike racks on Class I hitches. They are not required necessarily but once were recommended for the Curt Trailer Hitch Receiver…

view full answer...

Answer 11

The etrailer Trailer Hitch Receiver #e98848 uses four 7/16-14 1-1/4" grade 8 carriage bolts to secure the receiver to the frame. This would require the Curt Fish Wire Bolt Leader - 7/16" #C58410 if that is all you are needing. If you would…

view full answer...

Answer 12

We do have a couple options for your 2022 Honda CR-V, however I recommend the EcoHitch Hidden Trailer Hitch Receiver #306-X7345. This hitch is capable of handling up to 3,500lbs trailer weight, and 525lbs of tongue weight. For wiring, I recommend the…

view full answer...

Comparing Trailer Hitches For 2019 Honda CR-V

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching