Trailer Hitch And Wiring For A 2022 Honda CR-V Touring Hybrid With Hands Free Liftgate

Question

Question:

I need a hitch and wiring for my 2022 honda cr-v touring hybrid

asked by: Penny

0

Expert Reply:

We do have a couple options for your 2022 Honda CR-V, however I recommend the EcoHitch Hidden Trailer Hitch Receiver # 306-X7345. This hitch is capable of handling up to 3,500lbs trailer weight, and 525lbs of tongue weight.

For wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118741. This is an extremely easy to install kit that simply plugs into your vehicle's factory harness, no cutting or splicing is required.

expert reply by: Bryce D

0

Answer 1

Yes, we do have a hitch that will fit your 2022 Honda CR-V Hybrid Touring. It is the EcoHitch Hidden Trailer Hitch Receiver item #306-X7345. This hitch is custom fit and bolts directly to your CR-V's frame with included hardware. If you look…

view full answer...

Answer 2

The Curt Hitch part #C13397 is also a fit for your 2022 Honda CR-V and is a very similar to design to the EcoHitch that fits your vehicle #306-X7345 with same weight capacity but at a better price point. This would work great with a bike rack like…

view full answer...

Answer 3

Honda offers a Power Liftgate Sensor Relocation Bracket as part #08U59-TLA-100A for your 2019 Honda CR-V for when you install a hitch like the Draw Tite part #76128 so that the hands free lift gate will still function properly. That said, we've…

view full answer...

Answer 4

The installation instructions for the Honda Hands-Free Sensor Relocation Kit part 08U59-TLA-100A will come with the kit but as we do not offer this kit, I would not have those instructions for you. That said, the above kit is not always required…

view full answer...

Answer 5

For your 2023 Honda CR-V Hybrid we have the Curt hitch part #C12169 as a confirmed fit which would work great.

view full answer...

Answer 6

We do, the EcoHitch Hidden Trailer Hitch Receiver #306-X7345 is confirmed to fit the 2022 Honda CR-V Touring. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver which is the most…

view full answer...

Answer 7

When we installed the Curt Class III Trailer Hitch Receiver #C13397 on the 2019 Honda CR-V we measured a distance of right at 2-1/2" from the center of the hitch pin hole to the outermost edge of the rear bumper. From the ground to the top of…

view full answer...

Answer 8

Yes it will. For your hybrid you will want the Curt item #C12169. This hitch has a 1-1/4" receiver that will work great with your bike rack. I have linked an installation video below.

view full answer...

Answer 9

The only trailer hitch options we currently have available for a 2023 Honda CR-V are from etrailer and Curt. I recommend the etrailer Trailer Hitch Receiver part #e98848 which has a hidden design so only the receiver will be visible. It offers a…

view full answer...

Answer 10

The Draw-Tite #36597 Class I hitch will only hinder the sensors in the center of the bumper, where the receiver tube will block them. If you wave your foot to the left or right of the receiver tube by a foot or so, the sensors will pick up the…

view full answer...

Answer 11

We have the etrailer hitch part #e98848 which is a confirmed fit for your 2020 Honda CR-V hybrid. I attached a picture of it installed on a hybrid CR-V for you to check out as well.

view full answer...

Answer 12

I recommend the EcoHitch Hidden Trailer Hitch Receiver #306-X7345 for your 2022 Honda CR-V Touring. This receiver is confirmed to fit your Touring trim and with the Honda Sensor Relocation Bracket from Honda you will still be able to use your hands…

view full answer...

Trailer Hitch And Wiring For A 2022 Honda CR-V Touring Hybrid With Hands Free Liftgate

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching