Can Air Be Released From Timbren Axle-Less System to Lower Ground Clearance
Question:
I would like to know if there is the possibility to empty the air in the suspension of the trailer, to have less clearance with the ground for unloading my bike?
asked by: Vincent M
Expert Reply:
The Timbren Axle-Less Trailer Suspension Systems, like the 3,500 Pound # A35RD545 that you were looking at, feature independent AEON springs for load support. These are not air springs but durable hollow rubber springs, so they aren't something that you can adjust the air pressure for or empty out when needed to decrease your ground clearance.
This particular system does have a 4" drop spindle though, which will lower the overall deck height of the trailer for easier unloading/access.
I'm not sure what type of trailer you have but you could also add simple ramp like the Stallion # 288-07432 when needed to help with your bikes. This 90" long, 18" wide ramp just attaches to the rear of the trailer using rubber-tipped ends and a cam buckle safety strap.
I have attached a short video demonstration that you can check out as well.
Products Referenced in This Question
Arched Loading Ramp - Center Fold - Aluminum - 90" Long x 18" Wide - 1.5K
- ATV Ramps
- Single Ramp
- Center-Fold
- 18 Inch Wide
- 1500 lbs
- Arched
- 90 Inch Long
- Aluminum
- Stallion
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w Idler Hubs - Standard Duty - 4" Drop - 5 on 4-1/2 - 3.5K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- Drop - 4 Inch
- Timbren
more information >
Continue Researching
- Shop: Camco Travel Toilet - 2.6 Gallon
- Q&A: How to Measure Ground Clearance for a Trailer with a 7,000 Pound Drop Axle?
- Q&A: Replacement 95 Long 7,000 lbs Dexter Axle w/ 4 Drop Spindles
- Q&A: Recommendation To Replace Straight Axles On Trailer For Lower Ground Clearance
- Shop: Kenda Karrier ST175/80R13 Radial Trailer Tire with 13" Black Mod Wheel - 5 on 4-1/2 - LR D
- Shop: Demco Kar Kaddy X Tow Dolly w/ Disc Brakes - Tilt Bed Frame - 4,800 lbs - Wide Tread
- Article: Where to Position the Trailer Axle?
- Shop: Firestone Ride-Rite Air Helper Springs - Double Convoluted - Front Axle
- Shop: Suspension Enhancement
- Shop: Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 3,500-lb Axle
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Search Results: 25580
- Q&A: Seal With Dimensions to Replace 171255UC
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Trailer Wiring
- Search Results: 44649
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Read the Lippert Components Axle Description Measurements
- Shop: Fifth Wheel Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: dust cap
- Search Results: 68149
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Shop: Brake Controller
- Article: Trailer Tire Sizing
- Shop: Gooseneck Hitch