How To Determine If a 2018 Hyundai Santa Fe Limited has the Factory Tow Package

Question

Question:

I have a 2018 Hyundai Santa Fe Limited Ultimate AWD and cant tell if it has the factory tow package. I need to buy a wiring harness but cant tell which one is appropriate.

asked by: Mike R

0

Expert Reply:

I have two ways for you to determine if your 2018 Hyundai Santa Fe Limited has the factory tow package. The easiest way for you would be to just reach out to the dealer with your VIN as they would be give to give you a yes or no answer. The other option would be to look for the tow package plug which if present will be located underneath the vehicle, on the passenger’s side frame, near the rear tire (see photo).

If you have the tow package then you will want to use the Curt T-Connector Vehicle Wiring Harness part # C56332 but if not the Vehicle Wiring Harness Kit part # C59496 will be your only other option. If you don't already have a trailer hitch, the Curt Trailer Hitch Receiver part # C13153 is an excellent choice as it has the highest capacity and offers drill free installation. The only other thing you could need to complete your setup is a ball mount/hitch ball, the Ball Mount Kit part # 989900.

expert reply by: Conner L

0

click to enlarge

Answer 1

A tow package for your 2007 Hyundai Santa Fe could be a frame mounted trailer hitch and trailer wiring harness. If you have either or both of those two things you could pretty easily assume you have the tow package. Another option you have is to take…

view full answer...

Answer 2

The easiest and most accurate way to determine if your 2015 Hyundai Santa Fe has the factory tow package is to simply run by your local Hyundai dealer with your VIN. With this information they will be able to tell you with certainty whether or not…

view full answer...

Answer 3

Your 2017 Hyundai Santa Fe has the trailer wiring circuits already combined so that the trailer lighting will function. Part of the vehicle's trailer wiring package is that it has the converter already. So all you need to install a 4-way would be…

view full answer...

Answer 4

The Reese and Draw-Tite products are manufactured by the same parent company, this means that the #26102 and #26002, Dual Cam Sway Control systems are the same, but there is a difference in the generations of the systems. The older systems had Hanger…

view full answer...

Answer 5

When the etrailer Cargo carrier part #e98874 is folded up there is a distance of 9-1/2 inches from the center of the hitch pin hole to the nearest rail of the carrier. You would need to measure from the pin hole on your hitch out to the furthest…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...