How to Determine Correct Replacement Slipper Springs
Question:
Spacing Requirements for Slipper Springs. Where can I find how much space or clearance is required to accommodate the elongation of a slipper spring during its travel?
asked by: MARK
Expert Reply:
I can help you determine how to figure out the right replacement slipper springs, though I'm not 100% certain what you mean by "where can I find how much space or clearance is required." I think you are asking if there is a standard amount a slipper spring will elongate over time, and the answer is unfortunately no, as it all depends on the amount of weight on the spring, the amount of time it was used, the quality of the spring, etc.
I would take into account an inch or so of your slipper springs elongating (give or take) and with that in mind the best way to determine if a slipper spring will fit is by measuring the length from the center of the spring eye to the end end of the spring, as you can see in the accompanying diagram (the best way to get an accurate length of a leaf spring is with the trailer up on jacks with the axle hanging). You will also need to know the width of your spring and the weight rating of your axle.
I have added a link to a help article on slipper spring suspension which I highly recommend checking out.
Product Page this Question was Asked From
etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Trailer Leaf Springs
- Slipper Springs
- Open Eye
- 4300 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26-1/4 Inch Long
- Dacromet
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of Lippert Trailer Leaf Spring Suspension - U Bolt Axle Mounting Hardware Kit - LC27XV
- Shop: Single-Axle Trailer Hanger Kit for 1-3/4" Slipper Springs - 1-1/2" Tall Front
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
- Shop: Replacement U-Bolt Axle Mounting Hardware Kit - 3" Axles
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Q&A: Replacing Slipper Springs on 1990 EZ Loader Boat Trailer With 3500 Axle
- Q&A: Hanger Kits to Use with 1-3/4 inch Wide Slipper Leaf Springs for Trailer
- Q&A: Replacement Trailer Leaf Spring for 2,700 lb Axle 26-1/4 inch In Length
- Q&A: Replacement Slipper Leaf Spring Recommendation for 1985 Load Rite Trailer
- Q&A: Should a Nylon Bushing Be Used With the Open Eye End Of Slipper Spring # e33SR
- Shop: 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles - 27" Long
- Q&A: Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Q&A: How to Measure Leaf Springs to Find Replacement Parts
- Shop: CE Smith U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts - Zinc
- Article: Slipper Spring Trailer Suspension System Review
- Search Results: leaf springs
- Search Results: boat trailer leaf springs
- Shop: Replacement Top
- Video: etrailer Trailer Axle 4-Leaf Double-Eye Spring Installation
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: 44649
- Search Results: 68149
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Video: Titan Trailer Brakes T2385200 Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Brake Controller
- Search Results: 25580