Brophy Clamp On Camper Tie-Downs Replacement T-Bolt

Question

Question:

I have the brophy clamp tie-downs and i took them out of the pockets and lost one of the dang T-shaped bar parts will i have to buy a new clamp

asked by: Carol D

0

Expert Reply:

We do have a replacement T-bolt available for the Brophy Camper Tie-Downs part # HSAB, part # HSBP, part # HSCP, part # HSSF or part # HSWB. The replacement T-Bolts are part # BR2007 and only come in a pack of four. I have attached an installation video of HSAB for your reference.

expert reply by: Heather A

0

Answer 1

There is a 5th wheel wiring harness for your 2020 Chevy Silverado that was designed to fit perfectly in the factory cut out in your truck bed. The harness you need is the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness #HM54FR. I…

view full answer...

Answer 2

I confirmed with Brophy that the length of the Replacement T-Bolt for Brophy Camper Tie-Downs #BR2007 is 6 inches long.

view full answer...

Answer 3

It sounds like you're wanting to add a 7 way receptacle into your truck bed cutout on your 2012 Silverado 2500; for that, I recommend using the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long #C56070. This…

view full answer...

Answer 4

The Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 #HSSF and the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 #HSAB will be equally strong. I reached out to my contact at the…

view full answer...

Answer 5

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…

view full answer...

Answer 6

If you are looking for the Brophy part number of 2007, then you are wanting our Replacement T-Bolt for Brophy Camper Tie-Downs, #BR2007. These are 6" in length, quantity of 4 with order. Please follow the link to product page, add to cart and…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...