How Far Out Does the Curt Trailer Hitch C11448 Extend From the Bumper on a 2019 Audi A5

Question

Question:

How much does the hitch extend past the bumper of the car?

asked by: Pj

0

Expert Reply:

I wish we had the chance to install the Curt Trailer Hitch Receiver part # C11448 on a 2019 Audi A5 that way I could give you this exact measurement but sadly, that is not the case nor does the manufacturer provide this. That said, I have a really good photo for you which is attached that shows how the receiver tube aligns with the rear bumper. As you can see, the receiver tube actually sits about a few inches in from the edge of the bumper which makes for the best look and is what most trailer hitch manufactures aim for.

expert reply by: Conner L

0

click to enlarge

Answer 1

I sent the pictures you sent to us to Curt to see if they had any insight and they had not seen that brace before. They said that it looked like an aftermarket frame brace. They said most likely if you returned the vehicle back to stock and removed…

view full answer...

Answer 2

view full answer...

Answer 3

The Kuat NV, #NV12G as an example, and the Sherpa, #SH12B as examples, are platform style carriers that hold the bikes at the wheels and would not be the best bike racks when using stabilization strap #18050 with a Curt trailer hitch #C11471 on…

view full answer...

Answer 4

When we measured the clearance needed to install the Thule Helium 2 Bike Platform Rack TH44VR we actually found that from the center of the hitch pin hole to the closest edge of the rack when folded was 5", and when not folded was 12", but…

view full answer...

Answer 5

The short answer is yes, but you may have issues if you are going to places with steep inclines. If you install the Curt Trailer Hitch Receiver, part #C11448 onto your 2018 Audi A5, your clearance will drop just a little to about 3-1/4 inches. This…

view full answer...

Answer 6

In order to have a trailer hitch installed on your 2017 Audi A4, I recommend that you take your vehicle to a local RV dealer who has a service center as they would be the most experienced with this type of install. That said, we do not have any…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...