What Are the Bearing Pre-Load Requirements for a Mobile Home Axle
Question:
how much torque should i torque to for proper bearing pre load? i used 50 ft lbs like my H D motorcycle is that to tight? traveling 600 miles one way and dont need trouble. torqued to 50 backed off castle nut and cotter pinned.
asked by: Guy
Helpful Expert Reply:
There is not an exact torque specification to pre-load the bearings on a mobile home axle. The spindle nut will need to be tightened by hand until finger tight and then turned another 1/4 of a turn with a wrench. This will be around 15 ft-lbs but you should not be using any sort of torque wrench for this. Once this is done you can then turn the hub ten or so times to seat the bearings and races but don't forget to back the spindle nut off some before you install the cotter pin and put the wheels on.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Bearing Repacking and Grease Seals Installation
- Search Results: bearing grease
- Search Results: bearings
- Search Results: cotter pins
- Shop: Square BT8 Spindle for 2,000-lb Trailer Axles - 1-1/2" Wide
- Shop: LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Type of Nut Retainer Does Dexter Trailer Idler Axle # 20440I-EZ-60 Come With
- Q&A: Availability of Equalizer Bolt, Cotter Pin, and Castle Nut for Tandem-Axle Trailer Hanger Kit
- Q&A: What Material is the Convert-A-Ball Interchangeable Ball Set # 906B Made Of
- Q&A: Correct Replacement Castle Nut, Cotter Pin, and Washer for Trailer with 1" Round Spindle
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Q&A: What is the Torque Rating for an Equalizer Bolt
- Q&A: Do I Need to Have a Castle Nut or Cotter Pin to Keep Spindle Nut From Backing Off
- Search Results: 205/75/r15
- Search Results: trailer dolly
- Search Results: dust cap
- Search Results: dust cap tool
- Shop: Karrier ST205/75R15 Radial Trailer Tire with 15" Silver Mod Wheel - 5 on 4-3/4 - Load Range C
- Shop: Trailer Hitch
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller