Replacement Sidewind Handle and Gear Kit for Fulton Trailer Jack

Question

Question:

Clark spoke with Fulton tech-support I need a 0933302S00 Also 0933301S00 that's the handle and the gearset call me I'll give you a credit card number

asked by: Charles T

0

Expert Reply:

Could you possibly get me the brand of landing gear that you have? It's nearly impossible to pick out the gear kit based on dimensions of the bevels but with more info that can help narrow down the search.

expert reply by: Jameson C

0

Charles

8/30/2017

Clark spoke with Fulton tech-support I need a 0933302S00 Also 0933301S00 that's the handle and the gearset call me I'll give you a credit card number

Reply

Jameson C.

8/30/2017

We have the two parts you need. The gear kit part # F0933302S00 and the handle part # F0933301S00. Hit add to cart at the product links below and you'll be able to enter your credit card and shipping info!

Reply

Answer 1

Installing the #F0933302S00 gears is fairly easy but without proper guidance I can see how it would be pretty difficult, You will need to remove the cap at the top of the jack. The handle and gear are held in place with a roll pin. Remove the pin.…

view full answer...

Answer 2

The Replacement Gear Kit for etrailer and Ram Round Swivel Marine Jacks part #MJ-1000B-GR have a 1/2" inner diameter and 1-1/8" outer diameter.

view full answer...

Answer 3

We do not offer a gear kit specifically for the Reese 74410 trailer jack but there is a good possibility that the Replacement Bevel Gear Kit for Fulton Jacks, #F0933302S00, will work for you. I have included a picture which lists the dimensions of…

view full answer...

Answer 4

I pulled the Fulton Bevel Gear Kit, #F0933302S00, from the warehouse and measured the bevel gears for you. The gears are 1-1/8 inches outer diameter x 15/32 inch thick with a 1/2 inch inner diameter. The groove pin is 3/16 of an inch in diameter x 1…

view full answer...

Answer 5

It is likely based on the capacity of the jack that you will need bevel gear kit, #F0933302S00, that you have referenced. You may be able to find more information about the jack by looking at the cap or for numbers near the bottom of the inner/outer…

view full answer...

Answer 6

The Replacement Bevel Gear Kit #F0933306S00 is for applications. The #F0933302S00 will fit the following Fulton jack models: TJ503/C, TJU503, PMJ53, TJ507/C, PMJ75, CS750, GR700/TJ712, XP10/6/W/WC and XP100. Since your jack is as old as it is and you…

view full answer...

Answer 7

I spoke with my contact at Fulton about the issue you are having with your 1500 pound Magnum trailer jack. His first thought was that the tongue weight could be too high and this could make it difficult to get the wheel to rotate or pivot. It is also…

view full answer...

Answer 8

Thank you for providing the photo of your Fulton jack handle as well as the clear description of the compatibility issue you've encountered with the jack repair kit you purchased, part #F0933302S00. My contact at Fulton was able to confirm that…

view full answer...

Answer 9

There are one Fulton Jack repair kit available that could potentially work for you. You will need to get some measurements from the gears in your jack in order to know which one would work for you. I attached a picture that has all of the dimensions…

view full answer...

Answer 10

Based on the 1-1/8" diameter x 1/2" thick measurements you provided of your current gears, the Replacement Fulton Gear Kit #F0933302S00 would be the correct gear kit for your older Fulton jack as it includes two bevel gears that are…

view full answer...

Answer 11

We do carry a few Replacement Bevel Gear Kits. like #F0933302S00, for Fulton jacks. These kits can be match by the manufacture and production year. There is a date code that should be stamped in the outside tube near the bottom of the jack. If you…

view full answer...

Answer 12

We only offer 1 beveled gear kits designed to work with Fulton jacks at this time. The kit that we still carry is for Fulton jacks that have a capacity between 800 to 1,200 lbs, this kit is part #F0933302S00. I have attached a photo that shows the…

view full answer...

Replacement Sidewind Handle and Gear Kit for Fulton Trailer Jack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching