Base Rail Kit for the Curt A20 on a 1999 Ford F-250 with Short Bed
Question:
I bought a Curt A20 hitch to replace an older RBW hitch. I need to get a new install kit as well now since the RBW bed rail slots do not fit the Curt A20. Which kit would fit a 1999 Ford F250 superduty 6 ft bed?? I am hoping the bed rail bolt holes line up so all I would have to do is replace the rails. Thanks in advance for your help!
asked by: Rick G
Expert Reply:
The base rail kit I recommend for use with the Curt A20 on your 1999 Ford F-250 is the Curt Custom Base Rail Kit # C16443-204. This uses custom brackets that eliminate drilling into your vehicle frame but I don't recommend using same brackets from your RBW setup for these base rails because brackets and base rails need to be from the same manufacturer to ensure you have the correct weight capacity.
Please note that since you have a short bed for your Super Duty it would be best to have the sliding version of the A20, part # C16541, to make sure that you have enough trailer to cab clearance.
The Custom Kit # C16448-104 that you referenced is designed for 2005 - 2010 Ford Super Duty pickups.
![Jon G](https://images.etrailer.com/static/images/catg/people/1086_tn.jpg)
Products Referenced in This Question
Curt Custom Fifth Wheel Installation Kit for Ford - Glossy Finish
- Fifth Wheel Installation Kit
- Custom
- Above the Bed
- CURT
more information >
Curt A20 5th Wheel Trailer Hitch w/ R20 Slider - Dual Jaw - 20,000 lbs
- Fifth Wheel Hitch
- Sliding Fifth Wheel
- Above Bed Rails
- 5000 lbs Vertical Load
- 20000 lbs GTW
- Cushioned Double Pivot
- Standard - Double Jaw
- 17-1/2 - 21-1/2 Inch Tall
- 12 Inch Fore/Aft Travel
- CURT
more information >
Product Page this Question was Asked From
Curt Custom Fifth Wheel Installation Kit for Ford F250 and F350 - Carbide Finish
- Fifth Wheel Installation Kit
- Custom
- Above the Bed
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Fifth Wheel Hitch
- Shop: Trailer Wiring
- Video: Curt Custom Fifth Wheel Kit Installation - 2008 Ford F-250
- Shop: Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole - Ford, GM, Dodge, Nissan w/ Factory Plug
- Shop: Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 10' Long
- Shop: Mighty Cord 5th Wheel/Gooseneck Wiring Harness w/ 7-Pole Connector - 7' Long
- Q&A: Where do the Spacers Install, Curt Custom Fifth Wheel Installation Kit # C16443-204 2003 Ford F-350
- Q&A: Mounting Brackets for Curt E16 5th Wheel Hitch on 2004 Ford F-250 Short Bed
- Q&A: Can You Install 5th Wheel Rails on 2008 Ford F250 4WD With Airlift Airbags
- Shop: Curt Custom Fifth Wheel Installation Kit for Ford F250 and F350 - Carbide Finish
- Shop: Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug
- Shop: Reese 5th Wheel Trailer Hitch w/ Square Tube Slider - Dual Jaw - 16,000 lbs
- Q&A: Solutions for Trailer Sitting Too High When Connected to PullRite 2900 5th Wheel Hitch
- Shop: B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000 lbs
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: hitch
- Video: Choosing the Right Trailer Wiring
- Search Results: trailer brake controller
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Article: Trailer Wiring Diagrams
- Video: Choosing the Best Fifth Wheel Hitch
- Shop: Gooseneck Hitch
- Search Results: brake controller
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Tire Sizing
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Shop: Suspension Enhancement