Where do the Spacers Install, Curt Custom Fifth Wheel Installation Kit # C16443-204 2003 Ford F-350
Question:
03 F350 the Worthless instruction do not include the bed floor in the schematic when illustrating the bolt, spacers and nut assembly for the floor rails. I want to know where to put the C shaped spacers. Also I would really recomend that if you include or inform people that if their vehicle has a spray in bed liner the carriage bolts need to be about 1/4 longer. I am very nervous about the lack of thread engagment on initial tightening and final torquing. Thank you!!
asked by: Mark B
Expert Reply:
The square spacers go between the rails and the truck bed where the bolts go through that attach to the nuts on the under side of the bed. They should be placed in the lower corrugation in the bed. Sometimes, a hole for the bolt has to be drilled in the side of one of the raised corrugations. In this case, you can use an angle grinder and trim the spacer at a 45 degree angle so that it will fit.
So you would have a bolt going through the rail, then the spacer (which is between the rail and bed), then through the hole drilled in the bed. For an example, I have included a video below. Look at about the 1 minute and 30 second mark. Our installer places the spacers on the bed.
I spoke with my contact at Curt about the spray in bed liner. He stated that as long as the nut can cover the threads, it is far enough on the bolt. We usually suggest two threads beyond the end of the nut and that will be sufficient.
Product Page this Question was Asked From
Curt Custom Fifth Wheel Installation Kit for Ford F250 and F350 - Carbide Finish
- Fifth Wheel Installation Kit
- Custom
- Above the Bed
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt
- Shop: Curt Spyder Gooseneck Trailer Hitch for Fifth Wheel Rails, 25,000 lbs GTW
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Shop: Replacement Pull Pin Kit for Reese Outboard Fifth Wheel Mounting Rails
- Shop: Gooseneck Hitch
- Shop: Fifth Wheel Hitch
- Shop: Trailer Wiring
- Search Results: universal 5th wheel rails
- Shop: B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches
- Video: Curt Custom Fifth Wheel Kit Installation - 2008 Ford F-250
- Shop: Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole - Ford, GM, Dodge, Nissan w/ Factory Plug
- Shop: Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 10' Long
- Q&A: Will Husky 16k Hitch Fit Curt Rail Kit # C16443-204
- Video: Choosing the Best Fifth Wheel Hitch
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Gooseneck to 5th Wheel Adapters
- Search Results: gooseneck hitch
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Video: B and W Fifth Wheel Installation Kit - Universal - BWRVR3200 Review
- Search Results: 5th wheel hitch
- Q&A: Comparing Rota-Flex and Gen-Y 5th Wheel Pin Boxes
- Q&A: How to Determine Correct Height Setting for 5th Wheel Hitch
- Search Results: fifth wheel hitch
- Article: Ram Trailer Tow Prep Package
- Shop: Trailer Hitch
- Search Results: air bags
- Article: Trailer Wiring Diagrams
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Shop: Suspension Enhancement
- Video: B&W Turnoverball Underbed Gooseneck Trailer Hitch Review