Hitch Recommendation for a 2008 Toyota Matrix XR That Does Not Require Removing the Rear Fascia

Question

Question:

Hi! I am picking up a new used 2008 Toyota Matrix XR and will need help with understanding how to remove the rear fascia that I keep reading so that I can buy and install a hitch for a bike rack. Please send videos or other type instructions if at all possible Looking forward to buying my hitch from etrailer.com!

asked by: Eric M

0

Expert Reply:

You should check out the Hidden Hitch Trailer Hitch # 60965. This hitch does not require that you remove the rear fascia on the Matrix XR models for installation. I attached installation instructions for this product for you to check out.

Curt does require the use of their Support Strap # 18050 with any non-trailer loads so you will want to look at it to keep within the warranty guidelines of the hitch.

Since this hitch is a Class II hitch you will need to pick out a bike rack that is compatible with a Class II hitch.

expert reply by: Jameson C

0

Answer 1

Curt's 1-1/4-inch Class II round tube hitch #C12013 is a confirmed fit on the AWD 2005 Toyota Matrix XR and XRS and offers no-drill installation. The hitch will bolt to the bottom of the car's frame rails using the included hardware. Heat…

view full answer...

Answer 2

On some models of the Matrix, the muffler heat shield is installed in such a way that it would be sandwiched in between the hitch and the underside of the vehicle. If this is the case, the heat shield would either need to be trimmed away or removed…

view full answer...

Answer 3

The only difference is that Curt has one trailer hitch that fits a 2004 Pontiac Vibe GT, part #C12221 and one trailer hitch for a 2004 Pontiac Vibe NON-GT, part #C12234 while the Draw-Tite #24812 will fit both models. The Draw-Tite hitch is a Class I…

view full answer...

Answer 4

The difference is the shape of the cross tube. The part #C12228 has a square shaped tube whereas the part #C12221 has a round shape. Typically the round tubes are less visible than the square ones.

view full answer...

Answer 5

All available hitches made for your 2007 Toyota Matrix XR include both Class I and Class II types in the 1-1/4-inch size. All are shown on the linked page. You'll notice all three options, parts # 24812, #C12221 and #C12013, share a very similar…

view full answer...

Answer 6

The Curt #C18151 cargo tray you referenced is only compatible with a Class III hitch with a 2 inch receiver opening. The hitches available for your Matrix XR are Class I or II that have a 1-1/4 by 1-1/4 inch receiver opening. There are adapters…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Hitch Recommendation for a 2008 Toyota Matrix XR That Does Not Require Removing the Rear Fascia

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching