Which Erickson Tie Down Stake Pocket Anchors Fit 2011 GMC Sierra

Question

Question:

My stake pocket measures 2 1/2 x 1 5/8. 2011 Sierra. Will these work

asked by: Herb M

0

Expert Reply:

The Erickson Stake Pocket Anchors part # EM01006 are going to be too wide for your 2011 GMC Sierra but we do have the Erickson kit part # EM01003 that we do know fits your 2011 GMC Sierra so it would be the way to go.

expert reply by: Jameson C

0

Answer 1

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The correct tie-downs for your 2019 Ram 3500 Tradesman short bed depend on your hitch. You can choose from the following: With a factory installed hitch or non-Torklift aftermarket hitch -TorkLift Talon Camper Tie-Downs #TL52XR (front) and #TL34FR…

view full answer...

Answer 4

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

view full answer...

Answer 5

Thanks for the photo it was really helpful and based on that, you do have the OEM hitch for your 2003 Chevy Silverado 2500HD. The hitch is unique in that it has the same open-end on the tubes, the same brackets, and same chain loops, which are all…

view full answer...

Answer 6

For the TorkLift Custom Frame-Mounted Camper Front Tie-Downs #TLC2220 the 1/2-inch bolt that is to be installed in the hole in the bottom of the front spring perch should be placed using the included coiled bolt fisher wire. Insert the coiled end…

view full answer...

Answer 7

The AllTrek 4000 kits provide the best cushioning so if you were to upgrade from your CRE3000 kit to the Alltrek you would see a big improvement. If you have a 35 inch wheelbase you'd want the part #MR29DR or if you have a 33 inch wheelbase…

view full answer...

Answer 8

According to CR Brophy, the TDSF camper tie-down you refer to is not compatible with GM trucks after the 1988 model year. My contact tells me that the HSSF tie downs are indeed compatible with a 2012 Silverado. If you look at the provided photo, you…

view full answer...

Answer 9

Yes, the DeeMaxx Disc Brake Assembly #DE89YR will fit on a 3,500lb UFP axle. You may need a different Grease Seal #168255TB depending on the age of your axle. If you have a grease seal with a 1.68" inner diameter this is the seal you will need.

view full answer...

Answer 10

The brackets on the SumoSprings Trailer Helper Springs #SS26MV are 1-1/2" wide so they will fit evenly across the humps on your spring pads. I do not recommend cutting down the spring and you will be able to use these even with only having…

view full answer...

Answer 11

The part #PE99CV is a totally different seal design from the part #PE92TJ which is a bulb style. They both are tailgate seals for the Pace Edwards Bedlocker but the part #PE99CV is a sweep style seal and the part #PW92TJ is a bulb style. If what you…

view full answer...

Answer 12

I can absolutely help you determine the correct tire and wheel combinations for you to upgrade the 14" wheels on your 1986 Calkins Trailer but you will need to take a few measurements to confirm the fit. Unfortunately there is not a way for me…

view full answer...

Which Erickson Tie Down Stake Pocket Anchors Fit 2011 GMC Sierra

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching