Does Rainfly Need to be Removed from Yakima SkyRise HD Roof Tent for Travel

Question

Question:

Does the rain fly need to be removed in order to close the tent for travel?

asked by: Justin M

0

Expert Reply:

Before closing the Yakima SkyRise HD Tent # Y07437 up for travel you will need to remove the rainfly from the tent. I did also verify this with my contact at Yakima.

I have attached a short video review on the SkyRise that you can also check out.

expert reply by: Chris R

0

Peter

5/6/2020

can you remove steps from the ladder on the skyrise medium tent it seems i have far too many (because its on such a low car im guessing audi a4) when I pull it out I can never get a proper step arrangement going always 2 and 3 bunched together its very annoying

Reply

Chris R.

5/7/2020

There's not a good way to actually remove rungs from the SkyRise ladder. Your only option is to stack the unused rungs beneath the top one like you've been doing. I wish I had a better solution.

Reply

Answer 1

The rainfly of the Yakima Tent part #Y07436 does not have to be removed any time it's stored. You can store it on the tent when folded down or you could remove it altogether if you wanted. You can see more of this in step 14 of the attached…

view full answer...

Answer 2

The only method of attachment that Yakima offers for the SkyRise HD part #Y07437 is the clamp style you mentioned. I attached a picture of what it looks like. I also attached a review video link for the tent for you to check out as well. The clamp…

view full answer...

Answer 3

Yes, in order to install a Yakima roof rack on your Snugtop Rebel camper shell I recommend using the Yakima #Y57CV. This kit comes with everything you need for installation. It has 54" long adjustable tracks and 60" long aero crossbars…

view full answer...

Answer 4

The Yakima 58" Round Bars #Y00409 by themselves have a weight capacity of 165 pounds, but it is important to also verify the weight capacity of the Snugtop Rebel itself. Based on my research this looks to be at least 175 pounds for the Snugtop…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 10

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 11

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 12

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...