How Much Trimming Is Required for the Curt Hitch C13396 on a 2018 Land Rover Discovery Sport

Question

Question:

Do you have any finished pictures of this on a 2018 disco sport? I would like to see if the trimming is only around the hitch or if it is also around the welded tow bar ends.

asked by: Joshua F

0

Expert Reply:

Yes, I have attached a photo for you that shows the Curt Trailer Hitch Receiver part # C13396 installed on a 2018 Land Rover Discovery Sport as well as a photo that shows the trimming required for both underbody panels. Please note that this hitch is a custom fit for your Discovery so although there is minor trimming of the plastic underbody panels, there is no drilling or major modifications required.

The Curt Trailer Hitch Receiver has a 4,500 lb gross trailer weight and 675 lb tongue weight rating. It is made right here in the USA, comes with a durable black powder coat, and has a lifetime warranty. It is currently the only option available for your vehicle at this time.

expert reply by: Conner L

0

click to enlarge

Answer 1

The Curt #C13396 is designed for a 2015 - 2019 Land Rover Discovery Sport. The hitch mounting flanges taper inboard from rear to front at roughly a 7° angle. The mounting holes closest to the receiver tube at the back of the vehicle are 44.780…

view full answer...

Answer 2

Curt 2-inch hitch #C13396 is a confirmed fit on the 2016 Land Rover Discovery Sport without the 5+2 seating feature. This hitch installation will require trimming of both the underbody panel and lower fascia. There can be some variance in the exact…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...