Can Bulldog Gooseneck Coupler # BD0287690300 Fit Outer Tube with Set Screws

Question

Question:

I HAVE A OUTER TUBE THAT HAS THE SET SCREWS ON IT . I AM WONTING TO REPLACE INNER TUBE WILL THIS WORK

asked by: NICK

0

Expert Reply:

As long as the outer tube on your trailer has an inner diameter of 4-1/2 inches to match the Bulldog Gooseneck Coupler # BD0287690300 this will fit and work well with what you have now that uses set screws.

expert reply by: Jameson C

0

Answer 1

We have one gooseneck coupler inner tube that is 4-1/2 inches in diameter: #BD0287690300. You could trim the coupler some but on a 33 inch tall coupler like this if you wanted to shave off like 20 inches that would be way too much. How much are you…

view full answer...

Answer 2

The B&W gooseneck couplers come in 2 different setups; the Defender parts #BWGNC4250 and #BWGNC4251 as well as the Extend-A-Goose #BWTEXA4200. The Defender couplers have built-in locks and come with keys while the Extend-A-Goose is lockable if…

view full answer...

Answer 3

We have replacement gooseneck couplers that have a 30k capacity like the Bulldog BX1 part #BD1289050300 that you referenced but B and W only makes couplers that have a 25k capacity like the #BWGNC4250.

view full answer...

Answer 4

I believe what you are looking for is actually the part #BD0287690300. This coupler tube is 4-1/2 inches in overall diameter and is designed to have set screws secure it in place to the outer tube. I can't recommend the B and W you mentioned for…

view full answer...

Answer 5

There is one gooseneck coupler with a wide flange that is also the easiest to hook up to your gooseneck ball, which is the B&W Defender Locking Gooseneck Coupler. Not only is the coupler base a full 6 inches in diameter, it is also a funnel, as…

view full answer...

Answer 6

I checked with B and W and the Defender Locking Gooseneck Coupler Inner Tube part #BWGNC4250 has a wall thickness of .318 inch and the pin diameter it would need to be used with is 7/8 inch. The lock doesn't have to be used either so you can…

view full answer...

Answer 7

Ram gooseneck coupler #GCPN-25008 has set screws and a 7/8" diameter pin. The set screws are 3/4"-10 x 2-1/2". It is recommended to use a large crescent wrench to adjust the set screws since they have a square head instead of a hex…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Answer 11

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 12

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Can Bulldog Gooseneck Coupler # BD0287690300 Fit Outer Tube with Set Screws

Product Page this Question was Asked From

Continue Researching