Gooseneck Coupler Replacement that has 30k Capacity

Question

Question:

Do you sell the BandW Gooseneck Coupler rated for 30,000 Lbs? Does not need to be locking. Need a replacement coupler for a horse trailer and would prefer it be a BandW.

asked by: Marcy L

0

Expert Reply:

We have replacement gooseneck couplers that have a 30k capacity like the Bulldog BX1 part # BD1289050300 that you referenced but B and W only makes couplers that have a 25k capacity like the # BWGNC4250.

expert reply by: Jameson C

0

Answer 1

I believe what you are looking for is actually the part #BD0287690300. This coupler tube is 4-1/2 inches in overall diameter and is designed to have set screws secure it in place to the outer tube. I can't recommend the B and W you mentioned for…

view full answer...

Answer 2

We have one gooseneck coupler inner tube that is 4-1/2 inches in diameter: #BD0287690300. You could trim the coupler some but on a 33 inch tall coupler like this if you wanted to shave off like 20 inches that would be way too much. How much are you…

view full answer...

Answer 3

I checked with B and W and the Defender Locking Gooseneck Coupler Inner Tube part #BWGNC4250 has a wall thickness of .318 inch and the pin diameter it would need to be used with is 7/8 inch. The lock doesn't have to be used either so you can…

view full answer...

Answer 4

The B&W gooseneck couplers come in 2 different setups; the Defender parts #BWGNC4250 and #BWGNC4251 as well as the Extend-A-Goose #BWTEXA4200. The Defender couplers have built-in locks and come with keys while the Extend-A-Goose is lockable if…

view full answer...

Answer 5

The B&W #BWGNC4250 Defender Gooseneck Coupler isn't a trailer specific item. As long as the outer coupler tube on your gooseneck trailer will accept a 4 in diameter coupler, the B&W #BWGNC4250 would work well for you. The large funnel and…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Gooseneck Coupler Replacement that has 30k Capacity

Products Referenced in This Question

Featured Help Information

Instructions

Continue Researching