Best 2 Inch Trailer Hitch Receiver for 2019 Subaru Outback Wagon

Question

Question:

what is the best 2 inch hitch for 2019 Outback Wagon

asked by: John B

0

Expert Reply:

The best 2 inch trailer hitch receiver for your 2019 Outback is the Draw-Tite Max-Frame Trailer Hitch Receiver # 76227. This hitch is extremely strong rated for up to 600 lbs tongue weight and up to 4,000 lbs towing like many of the other options.

What sets this hitch apart is the hidden cross tube without the need for a stabilizing strap so it will provide a clean look and the best ground clearance. I've attached a photo of this hitch installed as well as attached a video of this installation. I think you will be very pleased with the overall look and function of this hitch which is rated as strong or stronger than many other models without the hidden cross tube.

expert reply by: Jason S

0

click to enlarge

Answer 1

The Draw-Tite Max-Frame Trailer Hitch Receiver part #76227 which is a fit for a 2010-2019 Subaru Outback will install via eight total 10mm nuts which are actually reused as they are the factory fasteners for the bumper beam. The most up to date…

view full answer...

Answer 2

You shouldn't have to trim or modify the foam bumper support of your 2017 Subaru Outback Wagon to install the Draw Tite hitch part #76227. The only thing you'd need to trim is the rear fascia panel to allow it to fit back over the…

view full answer...

Answer 3

The Draw-Tite Class III Max Frame Receiver Hitch #76227 referenced in your question is confirmed to fit your 2018 Subaru Outback Wagon. We do not yet have (as of August 2018) an installation video for this hitch on your vehicle. I have attached the…

view full answer...

Answer 4

What "fascia trim" required means in regards to the install of the Draw Tite hitch part #76227 on your 2019 Subaru Outback Wagon is that you will need to trim or cut the lower rear fascia to allow the hitch to fit through it. So basically…

view full answer...

Answer 5

Draw-Tite 2-inch hitch #76227 is a confirmed fit on the 2019 Subaru Outback Wagon and for your reference I linked both the written instructions and an installation video showing a 2019 model year. Hardware is not included with the hitch since it uses…

view full answer...

Answer 6

The Replacement Master Cylinder Assembly #T4395100 will not work to replace your Atwood master cylinder model 85841. Since replacement parts for your actuator are obsolete, your only option is to replace the entire actuator assembly. The Demco…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Best 2 Inch Trailer Hitch Receiver for 2019 Subaru Outback Wagon

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching