Trailer Hitch Installation - 2018 Subaru Outback Wagon Video

To see exactly where the port is for the install of the Tow Ready Harness part #118467 check out the install video I attached. It sounds like you have found the correct area by your mention of the blue wire that should be holding the harness to the…

Yes, the Curt Echo brake controller part #C51180 that you referenced is compatible with electric over hydraulic actuators like your Dexter.

For replacement hardware for your #e98847 you need the Replacement Hardware Kit #RHK. You will need to enter e98847 in the "Hitch Item Number" field and then choose etrailer in the drop down menu under…

To put your Curt Trailer Hitch Receiver #C13206 on your 2015 Subaru Outback, I recommend using the hardware kit #RHK which will get you all the parts that originally came with your trailer hitch so you can safely install it on your new vehicle. On…

The etrailer.com Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #E98847 requires using a 17/32 inch drill bit to install and then we recommend using a rotary tool with a carbide bit to enlarge the hole for the…

The best 2 inch trailer hitch receiver for your 2019 Outback is the Draw-Tite Max-Frame Trailer Hitch Receiver #76227. This hitch is extremely strong rated for up to 600 lbs tongue weight and up to 4,000 lbs towing like many of the other options.…

There isn't a specific distance you want to have between the bumper of a vehicle and the hitch ball, but in general you'll want more than an inch. This will give you additional leeway when hitching up the trailer so that you…

The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" item #e98847 is a confirmed fit for all models of the 2018 Subaru Outback Wagon. It's not stated in the instructions but if you look at the…

The best trailer hitch option for the 2019 Subaru Outback Wagon to a bike rack with a 2" shank is etrailer.com Trailer Hitch Receiver part #e98847 which provides better ground clearance than the other hitch options available. The extra…

Each of the trailer wiring harnesses that fit your 2019 Subaru Outback will be stored inside the rear hatch compartment. It can be completely out of the way though, as you can lift up the panel in the rear hatch where the connector is and simply…

I spoke with Hopkins about the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #HM11143865 and they stated that the harness is a fit for all models of a 2017 Subaru Outback Wagon without any trim exclusions.…

Based on how the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Connector #HM11143885 installs it should not have any affect on the backup sensors. Most likely what happened is the harness of the sensors got disturbed when you installed…