Parts Recommended to Flat Tow 1991 Jeep Wrangler

Question

Question:

Can I tow my 1991 Jeep Wrangler with 2013 Grand Cherokee Laredo?

asked by: Barbara L

0

Expert Reply:

So long as your 2013 Jeep Grand Cherokee has a trailer hitch and wiring you can tow your 1991 Jeep Wrangler. According to the owner's manual your Grand Cherokee has a towing capacity of 5,000 lbs (for a 3.6L engine), 7,200 lbs (5.7L engine and 4WD) or 7,400 lbs (5.7L engine and 2WD); and your '91 Wrangler falls underneath these weights, though you need to verify the towing capacities and your Wrangler's weight.

For your Grand Cherokee I recommend the Curt # C13182 due to its 6,000 lb capacity and for a wiring harness to add a 4-way either # 118425 if your '13 Grand Cherokee does NOT have the factory tow package or # 118384 if your Grand Cherokee has the tow package. For either harness please keep in mind it may be necessary to see a local Jeep dealer to activate the tow package wiring circuit.

There are a number of parts needed in order to flat tow your 1991 Jeep Wrangler, which I'll list for you, and you will need to note which bumper your Wrangler has to get the correct base plate kit

- Base Plate Kit - Standard Factory Bumper: Roadmaster Crossbar-Style Base Plate Kit # 1409-3 (This steel bumper has a flat top and face, which the 1409-3 brackets bolt to. However, some versions incorporate bumpers without a flat face and top which prevent the use of these brackets so please note the bumper your Wrangler has)
OR
- Base Plate Kit - Off-Road bumper with 1 Inch D-Ring Bumper Mounts: Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars # RM-035-1
- Tow Bar: Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522
- Safety Chains: RoadMaster 68" Single Hook, Coiled Safety Cables # RM-643
- Wiring Kit: Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154
- Supplemental Braking System: SMI Stay-IN-Play DUO Supplemental Braking System # SM99251

Base plates are vehicle-specific and both Roadmaster options are a fit for your Wrangler so long as you choose the one that is correct for your specific bumper. The Falcon tow bar is a great option because it has long arms which make it easier to maneuver when towing; the accompanying photo is of this tow bar being used with a Wrangler.

The wiring kit is designed to effectively prevent electrical feedback to keep your Jeep's electrical system safe, and the SMI Stay-IN-Play DUO is highly recommended because it is a one-time install which you can leave in so you'll never have to activate or deactivate it.

Finally, you may need a high-low adapter so you can tow your Wrangler level. If you take a look at the linked help article it will help you determine which adapter you might need I have added a link to your selection of high-low adapters as well as instruction manuals, video reviews and installations for you to take a look at.

expert reply by: Kyle S

0

click to enlarge

Answer 1

The Jeep Wrangler YJ generation was from 1987 to 1995. To flat tow yours you will need more than just a tow bar. First you will need a base plate kit to provide the attachment point on your YJ. For that you would want the #1409-1. This base plate kit…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Towing capacity of the vehicle can depend on numerous factors so the best way to accurately determine what your specific vehicle's capacity is would be to reach out to your local dealership with your VIN and they can look up the exact capacity…

view full answer...

Answer 5

What that means is that the cross section of the hitch that runs side to side is completely out of sight once it's installed onto the vehicle. The hitch you looked at, part #C13065, has a hidden cross tube that you can't see with it…

view full answer...

Answer 6

The Curt T-Connector Vehicle Wiring Harness #C62VR will plug in line of the factory wiring harness on your 2021 Jeep Grand Cherokee. I have included a picture of the drivers side connections. The female connector from the Cherokee will plug into the…

view full answer...

Answer 7

The only hub we have that is associated with a 3/4 inch spindle is #AH15450ECOMP. This is an agricultural hub that takes inner bearing #LM67048 and outer bearing #LM11949. But the spindle it fits on is not straight, it is tapered, #TRU54FR. If this…

view full answer...

Answer 8

We have mostly hidden trailer hitches that fit your 2019 Jeep Grand Cherokee Limited like the Draw Tite hitch part #75699 but we don't have OEM Mopar hitches like the part number you mentioned. The Draw Tite hitch will cost quite a bit less than…

view full answer...

Answer 9

Yes, we have exactly what you need. To convert the 4-way of your Jeep to a 7-way so that it will adapt to your trailer that has a 7-way you have two options. If your trailer doesn't have brakes all you would need is the #37185. This would simply…

view full answer...

Parts Recommended to Flat Tow 1991 Jeep Wrangler

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching