Replacement Hub for a 3/4 Inch Diameter Straight Spindle
Question:
I have a boat trailer that has a 3/4 spindle. I need a 4 lug hub to fit, the spindle is straight. Now it has a rim that fits the spindle with the bearings as part of the rim. Would like to use a hub and bolt the rim to the hub. Tire size is 4.80 - 8
asked by: Joe L
Expert Reply:
The only hub we have that is associated with a 3/4 inch spindle is # AH15450ECOMP. This is an agricultural hub that takes inner bearing # LM67048 and outer bearing # LM11949. But the spindle it fits on is not straight, it is tapered, # TRU54FR.
If this is a kit trailer then in order to replace the hubs, wheels, and tires you are going to have to replace the axle. I have included a link to the right to the straight axles and the axle-less systems that we have. The axle-less systems may be the best option for you since they are the "axle" and suspension all in one.
Products Referenced in This Question
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural
- Trailer Hubs and Drums
- Hub
- Agricultural
- LM67048
- LM11949
- For 3000 lbs Axles
- 1/2 Inch Stud
- 4 on 5 Inch
- TruRyde
more information >
Replacement Trailer Hub Bearing - LM11949
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .750 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Agricultural Spindle for 3,000-lb Trailer Axles - 1-5/8" Diameter
- Trailer Spindles
- Agricultural Spindle
- 1-5/8 Inch Diameter
- Round
- For 3000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Fifth Wheel Hitch
- Shop: Brake Controller
- Shop: Replacement 6" Caster Wheel for Ark Xtreme Off-Road Swing-Up Trailer Jack - Qty 1
- Search Results: wheel only
- Shop: B&W Companion 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 20,000 lbs
- Shop: Base Plate for Tow Bar
- Video: B and W Companion Custom Underbed Installation Kit Installation - 2023 Ford F-350 Super Duty
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV- 2"
- Shop: Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches
- Shop: Dexter 3-Leaf Slipper Spring w Radius End for 22,500-lb Hutch Trailer or Dexter HDSS Suspension
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 10K
- Search Results: electric brakes
- Search Results: 9~28
- Search Results: bw hitch
- Search Results: 3/4 inch axle hub
- Search Results: junction box
- Search Results: atwood 61101
- Video: B and W Companion 5th Wheel Trailer Hitch with Slider Installation - 2019 Ford F-250 Super Duty
- Video: B and W Companion 5th Wheel Trailer Hitch with Slider Review
- Video: Review of Bulldog Jacks - 2-Speed 10,000 lbs Capacity Jack - BD183902
- Q&A: Canister Size of Retrax Hard Tonneau Cover For Clearance Dimensions
- Shop: Front Mount Hitch
- Q&A: Wheel Hubs Availability for a Spindle that is 3/4 of an Inch
- Q&A: Recommended Replacement Hubs For 1950s Boat Trailer
- Q&A: Replacement LED Taillight Recommendation for 2002 Shoreland'r Profile 2000 Boat Trailer
- Q&A: Recommended Replacement For An Atwood G6A-8E RV Water Heater
- Q&A: Replacement Shroud for Coleman Mach AC Unit
on Trailer Hubs and Drums
Todd
9/6/2020
I have the same situation as described above. Do these hubs for a 3/4 inch straight spindle not exist? Also, could I get some links to help me explore my options? Thanks!