Dimensions of the 12" Blue Ox Hitch Extender

Question

Question:

What is the depth of the receiver tube from the opening end to the centerline of the pin hole and the total depth of the receiver tube?

asked by: Peter P

0

Expert Reply:

From the opening of the Blue Ox Hitch Extender # BX88264 to the center of the hitch pin hole measures 2-1/2". Then from the opening of the receiver to the start of the weld, which is about where the tube depth stops, measures 12-1/8". The total length, or depth, of the extender is 18-1/8".

I have attached a photo with these dimensions for you to check out as well.

expert reply by: Jon G

0

click to enlarge

Answer 1

The Advantage SportsRack Hitch Extender for 2" Trailer Hitches #HE6000 is a hitch extender for 2 inch hitch receivers. The larger tube is about 5-1/2 inches deep. It offers four extensions of 5-3/4", 8-1/4" or…

view full answer...

Answer 2

I went to our warehouse and took some measurements of the Blue Ox Hitch Extender for Tow Bars, part #BX88265 for you. The hollow portion of the adapter is 6-1.4 inches. The solid part of the adapter that installs in the hitch receiver is 6-1/4…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 8

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

First of all you will need the Roadmaster Direct-Connect Base Plate Kit 524470-5 #RM97RR for your 2024 Ford Maverick. The item #RM39FR you found is Roadmaster part number 524465-5 which fits certain Ford Escapes. Do understand the baseplate above…

view full answer...

Answer 11

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 12

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Dimensions of the 12" Blue Ox Hitch Extender

Product Page this Question was Asked From

Continue Researching