Does Curt Hitch C13406 Fit 2018 Toyota RAV4 Hybrid

Question

Question:

I have a 2018 Rav 4 Hybrid. Is there any problem with this hitch because of the battery being in the back of the vehicle??? Thank you for clarifying this question for me.

asked by: Carol S

0

Expert Reply:

The Curt hitch part # C13406 does fit the hybrid models of the 2018 Toyota RAV4.

expert reply by: Jameson C

0

Answer 1

The keyless entry sensor on your 2016 Toyota RAV4 Hybrid is located under the rear bumper on the passenger side of the vehicle. The installation instructions for the Curt Trailer Hitch Receiver part #C13406 state to move this under the cross tube…

view full answer...

Answer 2

The Curt trailer hitch part #C13406 is what I recommend for a mostly hidden trailer hitch that fits your 2017 Toyota RAV4. Only the hitch opening hangs below the rear bumper, so you get a mostly concealed look like you are looking for. I attached…

view full answer...

Answer 3

The Curt hitch part #C13406 and EcoHitch part #306-X7219 are both a confirmed fit for your 2018 Toyota RAV4 and will provide a trailer hitch that has a concealed crosstube making it less visible than most hitches overall. The key differences are that…

view full answer...

Answer 4

I have a solution for you to add a hitch with a hidden cross tube on your 2017 Toyota RAV4, but the Draw-Tite hitch you were looking at is not a confirmed fit on your vehicle. The best solution for a hidden style hitch is the EcoHitch #306-X7219,…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Does Curt Hitch C13406 Fit 2018 Toyota RAV4 Hybrid

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching