Curt Cargo Carrier Weight Capacity on 2015 Mazda CX-5

Question

Question:

Hello!! I have installed the cargo carrier and loaded it up with a load approximately 300 pounds. It seems to be dipping low in the back after it is all loaded. Is that going to be safe? I have provided a picture

asked by: Ashley S

0

Expert Reply:

Thanks for the photo. I was able to look at your order from us to see that you have the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"# C13315 and the 24x60 Curt Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs # C18153 both of which are rated for that weight. The issue is that your 2015 Mazda CX-5 according to your owner's manual is only rated for 200 lbs tongue weight max, so that is why you are experiencing the rear sag which is an issue for your suspension and ground clearance.

Once you add the 70 lb carrier weight and 300 lbs cargo, you are 170 lbs overweight with a 300 lbs load. The hitch receiver and the cargo carrier are rated independently of the vehicle, so you have strong equipment, but your vehicle chassis can't handle even close to their capacity.

expert reply by: Jason S

0

click to enlarge

Answer 1

The 2 inch trailer hitch I recommend for your 2024 Mazda CX-5 is the etrailer Trailer Hitch #e98902. This is the best due to its matte black powder coat which resists the inevitable scuffs better than other hitches.

view full answer...

Answer 2

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 3

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 4

To install the etrailer Trailer Hitch Receiver item #e98902 on your 2019 Mazda CX-5 Signature you will need to remove a two foot long L shaped panel that is beneath your vehicle. I have linked a diagram I made as well as an installation video. This…

view full answer...

Answer 5

Hey Steve! I really like having the wiring sit next to the receiver as well so I definitely get where you're coming from. Here are the parts I recommend installing on your 2024 Mazda CX-5: - etrailer Trailer Hitch Receiver #e98902 - Curt…

view full answer...

Answer 6

For the etrailer Hitch #e98902, the only possible trimming you need to do is if the seam seals overhang on the housing locations on your 2021 Mazda CX-5. This is if you do not have a Grand Touring model. If you happen to have the Grand Touring Model,…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...