Does the 24x60 Reese Cargo Carrier Part # 63153 Come with a Hitch Pin

Question

Question:

Does this come with the hitch pin?

asked by: Skip

1

Helpful Expert Reply:

No, the 24x60 Reese Cargo Carrier part # 63153 does not come with a hitch pin.

You could choose from the standard Pin and Clip # PC3 or the Anti-Rattle Trailer Hitch Receiver Lock # 63232.

expert reply by: Conner L

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 4

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 5

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 6

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

The total height from the bottom of the receiver tube to the top of the closed GearLocker on the Yakima Exo Swing Away Storage System #Y74ZR is 42-1/2 inches tall. I went ahead and attached a diagram that shows this height for your convenience.

view full answer...

Answer 9

That is a keen observation and a good question. I actually had the chance to assist with assembly of one of the Flint Hill Goods 30" x 50" Wheelchair Carriers #FHG99ZR not too long ago. The main bolt for the shank is indeed quite large, so…

view full answer...

Answer 10

We do indeed have the exact tail light kit you need for the 24x60 Reese Cargo Carrier #63153: - Light Kit for Draw-Tite, Tow Ready, and Rola Railed Cargo Carriers #20174 This light kit is a confirmed fit for the Reese cargo carrier so it is exactly…

view full answer...

Does the 24x60 Reese Cargo Carrier Part # 63153 Come with a Hitch Pin

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching