Trailer Wiring T-Connector Compatible with 2018 Toyota Sienna SE

Question

Question:

WE ARE TRYING TO ORDER THIS WIRING HARNESS FROM YOU. DO YOU HAVE ONE THAT IS MADE FOR THE SE LET ME KNOW PLEASE

asked by: STANLEY K

0

Expert Reply:

For your 2018 Toyota Sienna SE I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118498. This is the confirmed fit for the SE model which is slightly different than the other models. It will install in the same way behind the tail light assemblies and with power directly from the vehicle battery to protect your Sienna SE wiring and electronics. I've attached a video to assist as well as an article for help routing that power wire.

Once the installation is complete the 4-way flat connector will be stowed within the jack storage compartment of your rear cargo area when not in use.

expert reply by: Jason S

0

Answer 1

For your 2017 Toyota Sienna the Curt hitch part #C13343 is listed as a "concealed hitch". This means that most of the hitch isn't visible but the hitch opening where the ball mount slides into. This is as concealed as you are going to…

view full answer...

Answer 2

On your 2018 Toyota Sienna, the bumper does not get trimmed at all when installing the Curt Trailer Hitch Receiver #C13343. Only the underbody panel gets trimmed. I've attached a video to assist. The wiring harness needed depends on the trim…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 8

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Trailer Wiring T-Connector Compatible with 2018 Toyota Sienna SE

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching