Tekonsha Custom Fit Vehicle Wiring - Trailer Hitch Wiring - 118498 Review Video

I might have a solution for you. However, the Yakima 50 inch Wind Faring Y07049 has been discontinued. Inno does offer a 48 in fairing, #INA262, that might work for your application. Another option will be the Rhino-Rack Fairing for Roof Racks -…

Yes, you will need to buy the wiring harness separately and we do have installation videos for both of the options for your Sienna. If your 2015 Toyota Sienna is not a SE model you will need the Curt T-Connector Vehicle Wiring Harness item #C56261.…

You do need to make a direct wired battery connection for a powered wiring harness like #118498 because the small accessory 12V convenience outlets provided in vehicle do not have a high enough current rating to power the harness and all of the…

When installing the WeatherTech Side Window Air Deflectors #WT82476, there is no adhesive strips used on the front deflectors. I have attached a link to an installation video for the deflectors on a 2015 Grand Caravan and as you can see in the…

All of the available trailer wiring harness available for a 2011 Toyota Sienna, including the CURT wiring, #C56106, install by connecting in line with the tail light wiring connectors located behind each of the vehicle tail lights. A power wire…

On your 2011 Sienna, you will first need a 4-way connector like part #118498. You will then need part #ETBC7 to convert the 4-way to a 4-way and 7-way trailer connector to tow your pop-up with brakes. To use the brake controller like part #90195 in…

For your 2012 Toyota Sienna Tow Ready wiring harness #118498 will establish the 4-Way like you said. You can use #30717 as a 4 to 7-Way adapter but I recommend #37185 because it will give you both a 7-Way and still retain the 4-Way. The white wire…

Both the Curt Hitch part #C13105 and the Draw-Tite part #75237 will fit pretty tight to the rear of your 2014 Toyota Sienna. I attached an install pic of both hitches to show you that they both hitches will basically be just as tight. The e-coating…

The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118498 that you referenced comes with everything you'll need to install it. No additional items would need be needed to install. I attached an install video for this kit on a…

Circuit breakers like what come with the #ETBC7 will automatically reset after they have been tripped. There is no way to manually reset them.

To connect your vehicle that has a 4-Way flat connector to your trailer that has a 7-Way connector, you will need to install a 7-Way on the rear of your vehicle. If you just want or need the tail light functions to operate on your trailer you will…

When we test fit hitches, we take note of above ground height of the inside top of the receiver tube. When the size of the receiver (2 inch or 1-1/4 inch) and the thickness of the lip around the receiver (1/4 inch) is deducted, you get a good…