Dimensions of the Dutton-Lainson Worm Gear Hand Winch # DL10954

Question

Question:

What are the measurements of the DL 10954 winch... total length, total height, total width... less crank?

asked by: Al N

0

Expert Reply:

I went out to the warehouse and took pictures of the Dutton-Lainson Worm Gear Hand Winch, part # DL10954. I am including a couple of pictures that will show the dimensions on the winch.

The overall length of the winch is 5-1/2 inches. The overall height to the top of the drum is 5-1/2 inches. The height to the top of the side of the base is 4-1/4 inches.

The width of the winch is 4-3/4 inches. The overall width of the drum is 2-5/16 inches.

expert reply by: Jeff D

0

click to enlarge

Answer 1

The Adapter Kit for Rhino-Rack RTL600 Legs #RRT-FK2 has dimensions of 20mm x 20mm and a thread size of 1mm.

view full answer...

Answer 2

The Dutton-Lainson Hand Winch #DL10954 has a loop that is 0.313 inches diameter of the outer loop. The length is just under 2 inches on the inside and is 1.125 inches wide internally. I've attached a photo to help further with dimensions.

view full answer...

Answer 3

We currently do not offer the extension that you could use to operate the loop drive on winch #DL10954 because there are so many possible lengths that customers could need. As for the cable attachment it is fairly easy. First, for a cable, the…

view full answer...

Answer 4

We have had this question before and our jack manufacturers don't rate their jacks for them to be used basically to retract weight as opposed to lift it. Your best option would be a ceiling hoist worm gear winch like the Dutton Lainson part…

view full answer...

Answer 5

Worm gear winches actually make the best hoists like what you described. The Dutton Lainson Worm Gear winch part #DL10954 is a ceiling hoist designed for exactly what you are looking for. It has a 1,500 lb lifting capacity and mounts to the ceiling.

view full answer...

Answer 6

Only worm gear winches should be used for hoisting things as they are the only ones rated for that. For a winch the Dutton-Lainson Worm Gear Hand Winch #DL10954 would work great as it has more than enough capacity. It also can be mounted to the…

view full answer...

Answer 7

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 8

The tracks part #RTC14 can install on the top of a camper shell to add a roof rack to it. For feet you would want part #RLT500 for a quantity of 2 feet, then for 71 inch long HD Crossbars part #RB1800S for each bar.

view full answer...

Answer 9

The Dutton Lainson worm gear winch you referred to, part #DL11004 is indeed compatible with cable. I've confirmed this for you with Dutton Lainson. The cable is available as part #DL24045.

view full answer...

Answer 10

The Rhino-Rack RTC-Style Roof Rack Tracks will work with the Camper shell to give you the compatible tracks. There are different lengths available and you can cut them down if needed: Rhino-Rack RTC-Style Roof Rack Tracks - 31-1/4" Long…

view full answer...

Answer 11

The Dutton Lainson Split Reel winch part #DL10976 was designed to use one cable through both sides of the drum. There wouldn't be a way to use two different cables with it. I have attached a photo showing how a cable is fed through this drum.…

view full answer...

Answer 12

You would want a Worm Gear Winch like the part #DL10954 that can be used as a hoist. Worm gear winches are really the only type of hand winch that is designed to work well with hoisting items off of the ground and suspending them. This winch has a…

view full answer...

Dimensions of the Dutton-Lainson Worm Gear Hand Winch # DL10954

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching