Dimensions and Thread Size of the Adapter Kit for Rhino-Rack RTL600 Legs

Question

Question:

What are the dimensions and thread size?

asked by: Lee

0

Expert Reply:

The Adapter Kit for Rhino-Rack RTL600 Legs # RRT-FK2 has dimensions of 20mm x 20mm and a thread size of 1mm.

expert reply by: Scott S

0

Answer 1

I spoke with my contact at Yakima who said that they haven't tested a roof rack with a Pace Edwards UltraGroove Metal Hard Tonneau Cover, part #311-KMTA10A38 or #311-KMTA09A37 for a 5' or 6' bed respectively, but he did give me a list of…

view full answer...

Answer 2

The t-slot in your Pace Edwards Explorer Rails measure 0.759" wide so you can use the Eye Bolt Kit for Inno Roof Deck Platform Rack #IN37FR to add in more tie down points. The eye bolt will simply screw into the t-slot hardware for a fast and…

view full answer...

Answer 3

In order for you to use the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers, part #RRVA180B-RRRLT600, with a Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover for a 2017 Ram 1500, part…

view full answer...

Answer 4

Only worm gear winches should be used for hoisting things as they are the only ones rated for that. For a winch the Dutton-Lainson Worm Gear Hand Winch #DL10954 would work great as it has more than enough capacity. It also can be mounted to the…

view full answer...

Answer 5

We currently do not offer the extension that you could use to operate the loop drive on winch #DL10954 because there are so many possible lengths that customers could need. As for the cable attachment it is fairly easy. First, for a cable, the…

view full answer...

Answer 6

Worm gear winches actually make the best hoists like what you described. The Dutton Lainson Worm Gear winch part #DL10954 is a ceiling hoist designed for exactly what you are looking for. It has a 1,500 lb lifting capacity and mounts to the ceiling.

view full answer...

Answer 7

I went out to the warehouse and took pictures of the Dutton-Lainson Worm Gear Hand Winch, part #DL10954. I am including a couple of pictures that will show the dimensions on the winch. The overall length of the winch is 5-1/2 inches. The overall…

view full answer...

Answer 8

We have had this question before and our jack manufacturers don't rate their jacks for them to be used basically to retract weight as opposed to lift it. Your best option would be a ceiling hoist worm gear winch like the Dutton Lainson part…

view full answer...

Answer 9

The tracks part #RTC14 can install on the top of a camper shell to add a roof rack to it. For feet you would want part #RLT500 for a quantity of 2 feet, then for 71 inch long HD Crossbars part #RB1800S for each bar.

view full answer...

Answer 10

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 11

The Dutton Lainson worm gear winch you referred to, part #DL11004 is indeed compatible with cable. I've confirmed this for you with Dutton Lainson. The cable is available as part #DL24045.

view full answer...

Answer 12

For locks to ensure that your Thule Hullavator #TH898 is secure on your vehicle, you will need the Thule One-Key System Lock Cylinders #TH450200. This kit comes with 2 lock cylinders, 2 keys, and a universal master key that is used if you ever need…

view full answer...

Dimensions and Thread Size of the Adapter Kit for Rhino-Rack RTL600 Legs

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching