Brake Controller Plug Location on a Class C Motor Home Built on a Ford E-450 Chassis
Question:
I have a 2008 Ford E450 class c motor home . It is factory wired with 7 pin connector in rear and has all the fuses and relays all lights and elec. brakes for a trailer . WHERE IS THE PLUGIN FOR THE BRAKE CONTROLLER LOCATED UNDER THE DASH ?? I found a 6 pin connector by the emergency brake , it has 1 pin w/ 12v all the time, 1 pin w/ 12v with ignition on ,1 pin ground but no pins with continuity to the brake light switch or the elec. brake pin in the rear 7 pin connector ,
asked by: Ron
Expert Reply:
I spoke with my contact at Tekonsha and he informed that you are looking for a brown 6 pin connector behind the hood release, up near the firewall to plug in the Tekonsha Plug-In Wiring Adapter # 3035-P. He said there is also a gray connector that is very similar to the brown connector that the # 3035-P will actually plug into but it is not the correct one to use.
The Tekonsha Prodigy P2 Proportional Brake Controller # 90885 and the # 3035-P Ford Super Duty Adapter is what you need.
Products Referenced in This Question
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Brake Controller
- Q&A: How to Bleed Brakes With Dexter Zinc-Plated Brake Actuator
- Shop: DeeMaxx Single Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Video: Deutsche Hydrapro Alpha G Electric Over Hydraulic Brake Actuator Installation
- Video: Review of Deutsche Hydrapro Brake Actuator - Electric-Hydraulic Brake Actuator - DH44FR
- Video: Review of Dexter Brake Actuator - Bolt On Surge Brake Actuator - DX29FR
- Q&A: Replacement Disc Brake Kit Recommendation for 3,500 lb Axle with #84 Spindles
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Video: Review of Dexter Axle Brake Actuator - 099-175-20
- Video: Review of DeeMaxx Trailer Brakes - 3.5K 10 Inch Maxx Coat Disc Brake Assembly - DE89YR
- Shop: Hydrapro Alpha G-1600X Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi - 28.7 oz
- Video: HydraStar Electric Over Hydraulic Actuator Kit Review
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Shop: Dexter Zinc-Plated Brake Actuator w/ Electric Lockout - Disc - Multi-Fit Ball - Bolt On - 7,000 lbs
- Shop: Dexter Zinc-Plated Brake Actuator - Disc - Multi-Fit Ball - Bolt On - 7,000 lbs
- Shop: Trailer Wiring
- Video: Dexter BrakeRite Electric Over Hydraulic Actuator Manufacturer Interaction
- Q&A: Will Kodiak Disc Brake Kit part # K2HR35DKG Fit 13 inch Trailer Wheels
- Q&A: Difference Between Dexter DX7.5L A-60 Brake Actuators For Disc Brakes
- Q&A: What is Difference Between Dexter Couplers # DX29FR and # DX56FR
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer
- Q&A: Replacement Brake Actuator for Tie Down Engineering LP7000
- Article: Brake Controller Installation on a Ford Full-Size Van
- Article: Brake Controller Installation on a Full-Size Ford Truck or SUV
- Shop: Trailer Hitch
- Search Results: 3035~p
- Shop: Vehicle Tow Bar Brake System
- Shop: Vehicle Tow Bar Wiring
on Trailer Brake Controller
Jim F.
8/8/2020
What will cause my emergency brake light to stay on all the time.