Trailer Hitch Installation - 2018 Ram 1500 - Draw-Tite Video

The etrailer.com Trailer Hitch Receiver #E98852 is only a fit for 2019 Ram 1500 Classics that do not have a factory hitch. If you do not have a 1500 Classic and instead have the new style of 2019 Ram 1500 then the trailer hitch that will fit is the…

The Draw-Tite Max-Frame Trailer Hitch Receiver part #75662 is only a fit for the 2019 Ram 1500 Classic without a factory trailer hitch which is the old body style (fourth generation). The photo you attached shows a factory trailer hitch on what I…

If you have the 2019 Ram 1500 the only trailer hitch available that is confirmed to fit is the Curt Class IV & V Ultra Frame Receiver Hitch #C15005. If your truck is equipped with the factory hitch though it will need to be removed for this…

Yes, the Curt Trailer Hitch Receiver part #14374 is made of 1/4" thick metal and the Curt Trailer Hitch Receiver part #C15572 is made of 3/8" thick metal. They are both a fit for your 2018 Ram 1500. The class IV hitch is about 49 lbs and…

The Class II Curt Hitch #C12136 and Class II Draw-Tite Hitch #36493 for your 2016 Subaru Outback Wagon are very similar, but every Class I and Class II and some Class III Curt Hitches require stabilizing straps to be used when towing non trailer…

Trailer tires should be inflated when they are cold and should be inflated to the max psi rating on the sidewall. In your case you would want to run 80 psi. If you don't inflate them to the max psi figure you will lose weight capacity and…

For your 2018 Ram 1500 Express, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center #41948. This is a Class V hitch receiver with a 2 inch receiver opening. It is rated for 1500 lbs tongue weight and 12,000 lbs towing and even…

To convert your existing 4-pole to a 7-way trailer connector, I would recommend using an adapter, like part #37185. The adapter would plug into your existing 4-pole, and once the white wire is grounded, and the trailer is plugged in, your trailer…