Recommended Plug and Play Adapter for a Curt Brake Controller on a 2019 Ram 1500

Question

Question:

How do I know if this controller is plug and play for my vehicle?

asked by: Tom B

0

Expert Reply:

For your 2019 Ram 1500 the Curt TriFlex NEXT Trailer Brake Controller item # C24VV can be installed with a plug and play adapter using the Curt Custom Wiring Adapter item # C51458.

The port you need is right above where your right foot would be covered in a foam tape. I have attached a picture below to help you find it.

expert reply by: Jerred H

0

Brake Controller Plug
(click to enlarge)

Answer 1

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 2

Hi Jeremy; that's a good question and you'll actually need to go ahead and re-do the set up of your weight distribution system after adding the Timbren Rear Suspension Enhancement System #TDR1500DS to your 2019 Ram 1500. So it wouldn't…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

For your 2019 Ram 1500 the Curt TriFlex NEXT Trailer Brake Controller item #C24VV can be installed with a plug and play adapter using the Curt Custom Wiring Adapter item #C51458. The port you need is right above where your right foot would be covered…

view full answer...

Answer 8

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...

Answer 9

Hello Dan, I can definitely help with this. It is completely normal for the Curt TriFlex brake Controller #C24VV to show the current gain setting when the brakes are applied, or when the manual override is pressed. It sounds like you have the gain…

view full answer...

Answer 10

I see what you mean with the additional support bracket below the frame on your 2024 Keystone Hideout Sport 175BH travel trailer. I'm glad you reached out to us Peter as that is going to limit you on what you can use. With that additional…

view full answer...

Answer 11

Yes, they will. The B&W Custom Installation Kit w/ Base Rails item #BWRVK2604 are confirmed to fit the 2023 Ram 1500's without a diesel engine. These fit both the 5-1/2' and 6-1/2' bed lengths. These custom fit brackets mount in…

view full answer...

Answer 12

For your NEO NMS2685TR with the enclosed V-nose, the Reese Friction Sway Control Kit #83660 is the best option. Because of the length of your trailer, two are recommended. You can use the Reese Sway-Control Bracket for 2" Ball Mounts #RP26003…

view full answer...

Recommended Plug and Play Adapter for a Curt Brake Controller on a 2019 Ram 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching