Mighty Mounts for 2018 Subaru Outback With Factory Crossbars

Question

Question:

Do you know what vertical mighty mounts will fit a 2018 Subaru Outback so that I can use my Yakima ski/snowboard rack? The mounts I have are way too small.

asked by: Dawn

0

Expert Reply:

I assume your 2018 Subaru Outback has the factory crossbars and if so the Universal MightyMounts for Yakima Roof Mounted Accessories # Y03590 is the correct fit for a 2018 Outback.

expert reply by: Kyle S

0

click to enlarge

Answer 1

Yes, the Universal MightyMounts for Yakima Roof Mounted Accessories part #Y03590 will allow you to mount your Yakima HullyRollers and Yakima Mako Saddles on aero crossbars.

view full answer...

Answer 2

You made a great choice in the Lippert Components Power Stabilizer Trailer Jack. For starters, all of the jacks measure to be 70-1/2" long with a 3,500 lb weight capacity and have a 30" lift. The difference between them is in regards to…

view full answer...

Answer 3

Generally speaking, there is no need to apply a gasket maker on the outside of a grease seal prior to installing it in the hub. This is not really common practice nor have I ever seen any issues not doing so. That said, I am aware there are certain…

view full answer...

Answer 4

The Replacement Mounting Clamp for Yakima SkyBox Cargo Boxes part #Y62XR is an exact replacement for the Yakima Mounting Clamp 8890135 per Yakima. The only difference is the new design did away with the barrel nut but the bolt size and spacing are…

view full answer...

Answer 5

Most likely the answer to your question is yes. The Universal MightyMounts #Y03590 is designed to adapt most Yakima roof carriers to fit nearly all styles of roof rack crossbars. That being said since I do not know which carrier you have I cannot say…

view full answer...

Answer 6

I can help you choose between the Kuat Sherpa 2.0 and Kuat Transfer V2, as both are really nice bike racks. Let me start off, since you mentioned 3-bike rack, if that's what you were after you would need the Kuat Transfer V2 Bike Rack for 3 Bikes…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...