What Do the Raised End Panel Edges Look Like When Installing a Trailer Hitch on a 2009 Volvo V70
Question:
for installing the 75916 trailer hitch on a 2009 V70 not XC, it says to use the bolts/spacers and washers if there are raised edges on rear bumper end panel. What would It look like if there were no raised edges? I having a little difficulty determining if the end panel has raised edges or not.
asked by: Steve
Expert Reply:
I have attached a photo for you which shows a vehicle WITH the raised edges on the end panel and a vehicle WITHOUT the raised edges on the end panel. This end panel is attached to the vehicle's body, not the rear bumper fascia. If you take a look at the attached review video on the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75916, at the 5:50 mark you can see a smooth end panel on a similar Volvo XC70 which is pretty much the same as your V70 when it comes to installing a trailer hitch.
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Wiring
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Draw-Tite Max-Frame Trailer Hitch Installation - 2015 Volvo XC70
- Video: Trailer Hitch Installation - 2016 Volvo XC70 - Draw-Tite
- Video: Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56386 Review
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: hitch adapter
- Search Results: hitch
- Video: Hopkins Custom Fit Vehicle Wiring - Trailer Hitch Wiring - HM11143735 Review
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Video: Draw-Tite Max-Frame Trailer Hitch Installation - 2013 Volvo XC70
- Video: Hopkins Plug-In Simple Wiring Harness Installation - 2016 Volvo XC70
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Trailer Hitch Installation - 2011 Volvo XC70 - Curt
- Q&A: Recommended Wiring To Use A Prodigy P3 Brake Controller On A 2012 Volvo XC70
- Q&A: No Brake Lights with Hopkins Plug-In Harness On a 2013 Volvo XC70
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Vehicle Air Mattress
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Recommended Hitch for a 2024 Toyota Grand Highlander
- Shop: Brake Controller
on Trailer Hitch
