Comparison Between OEM and Aftermarket Trailer Hitch for 2019 Honda Odyssey

Question

Question:

I have a 2019 Odyssey. Wondering if I should go with a factory hitch or aftermarket. What are the differences?

asked by: Roy

0

Expert Reply:

We have a really nice selection of aftermarket trailer hitches available that are confirmed to fit your 2019 Honda Odyssey. The biggest difference between an OEM hitch and most aftermarket units is that a factory hitch will typically be a bit more hidden with just the receiver exposed. The good news is that Draw-Tite is aware of this difference so they designed a hitch with the part # 76170 that features the same hidden crosstube appearance when installed. This Class III hitch is confirmed to fit your 2019 Honda Odyssey and has a 3,500 pound towing weight capacity. It is also quite a bit more cost-friendly when compared to the OEM hitches available from Honda.

I have attached an installation video on the 2018 model Odyssey that you can use for reference.

expert reply by: Chris R

0

Answer 1

If you want to install the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13182 on your 2016 Jeep Grand Cherokee, you will use M14 bolts that are grade 5 as well as compatible flat washers. That is the replacement for what is…

view full answer...

Answer 2

The biggest difference between the Curt Trailer Hitches, #C64NR and the etrailer #e98855, is the #C64NR hitch sits up closer to the bumper which will give you a little more clearance between the bottom of the hitch and the ground. The Curt #C64NR is…

view full answer...

Answer 3

The ball measures 2-3/4 inches from the ball mount surface to the top of the ball. I am glad to see that you are making sure you get the proper ball mount for your tow set up. The rule of thumb is to be no more than 2 inches over or under. The…

view full answer...

Answer 4

For your 2022 Honda Odyssey I recommend the Draw-Tite Trailer Hitch Receiver #76170 due to its hidden crosstube design meaning once installed the only visible part of the hitch will be the receiver itself as shown in the included picture, but also…

view full answer...

Answer 5

For your 2018 Honda Odyssey, the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #76170 is a confirmed fit. The hands free liftgate sensor will need to be replaced to give you adequate space for the hitch. The video does…

view full answer...

Answer 6

According to my research the only suspension enhancement system available for the 2018 Honda Odyssey is the Timbren Rear Suspension Enhancement System #T26FR. It obviously won't be as smooth as an air suspension but in order to ensure security…

view full answer...

Answer 7

Both the #118781 and the #118753 are indeed confirmed to fit the 2018-2020 Honda Odyssey, both use T-connectors to plug into your tail light connectors, and both are rated at 5 amps for the stop/turn circuit and 7.5 amps for the tail light circuit.…

view full answer...

Answer 8

I can see why this might be confusing and there are some differences between all 3 of these wiring harnesses. I'll start off by explaining the differences between the Tekonsha #118781 and #118753 wiring harnesses. The main difference is that the…

view full answer...

Answer 9

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 10

There is a slight difference between the etrailer Trailer Hitch Receiver #e98869 and Curt Trailer Hitch Receiver #13241 that fits your 2020 Nissan Frontier, which is the finish. The etrailer hitch has a rugged matte black finish which is really good…

view full answer...

Answer 11

You can absolutely trust the manufacturer ratings for the ball mounts we have available, regardless of whether or not they feature a solid or hollow shank. Ball mounts and other towing products are typically tested well beyond their actual listed…

view full answer...

Answer 12

The Draw-Tite Max-Frame Trailer Hitch Receiver, #76170 and the EcoHitch Hidden Trailer Hitch Receiver, #306-X7372 are very similar. They are both Class III - 2" hitches with equal specs of maximum tongue weight being 525 lbs. and the max gross…

view full answer...

Comparison Between OEM and Aftermarket Trailer Hitch for 2019 Honda Odyssey

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching