Can JT's Strong Arm Stabilizers be Used with Lippert 6-Point Landing Gear and Jack System

Question

Question:

I have a 345 torgue heartland toy hauler with the six point level system will these work for me or could u tell me what I all need to help stabilize my camper thanks

asked by: Curt G

0

Expert Reply:

Yes, you can use JT's Strong Arm Jack Stabilizer # LC191025 with the Ground Control or Level Up system on your trailer if you added the adapter lugs # LC314592. The adapter lugs are sold in quantities of 2. The JT's kit listed above is the travel trailer version. It looks like your trailer is a 5th wheel so you would need # LC191023 for a 5th wheel if the landing gear has 58 inches or more between the front jack legs. If less than 58 inches use # LC191024.

One of the best items to stabilize front to back on a tandem axle trailer is Super Grip Chock XL Wheel Stabilizers # UF21-001095. These prevent the wheels from moving at all so that front to back rocking sensation is eliminated. Take a look at the video I have included showing how it works.

On 5th wheel trailers another useful stabilization item is a tri-pod stabilizer such as # UF19-950500. People who need to access the 5th wheel overhang inside the trailer swear by them. I have linked a video of this stabilizer as well.

expert reply by: Michael H

0

Answer 1

I attached a picture that has the install instructions for the Lippert Components JT's Strong Arm Jack Stabilizer Adaptor Lug #LC314592 that you referenced to show you how it installs. They can be welded or bolted to the feet.

view full answer...

Answer 2

The Lippert Components JT's Strong Arm Jack Stabilizer Kit - Over 58" Between Landing Gear, #LC191023 can be used with the Lippert Level Up with the correct adapter, part #LC314592. I spoke with my contact at Lippert to confirm this.

view full answer...

Answer 3

Sounds like you have an auto leveling Lippert Ground Control/Level Up jack kit on your trailer. Yes, the JT Strong Arm Stabilizer System #LC191023 will work with your LCI Level Up System. I checked with Lippert and found that you can use the JT's…

view full answer...

Answer 4

In order to switch from your electric brakes to a disc brake system there are several things you will want to consider. It is true that the disc brakes will provide better braking for you, although converting can require an involved installation.…

view full answer...

Answer 5

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 6

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 7

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

If you have already added the fuse and the trailer charge circuit is not activated in the 2019 Ford F-350 Super Duty with factory integrated brake controller, then you want to make sure the trailer is connected and you press the brake according to a…

view full answer...

Answer 11

I recommend going with the Curt Trailer Hitch Receiver #C11424 for your 2017 Hyundai Elantra as long as it's a Sedan (excluding the Sport edition). I like the Curt hitches because they tend to have a thicker powder coat which helps to protect…

view full answer...

Answer 12

The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…

view full answer...

Can JT's Strong Arm Stabilizers be Used with Lippert 6-Point Landing Gear and Jack System

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching