Installation Instructions for the Lippert Components JT's Strong Arm Jack Lug # LC314592

Question

Question:

I would like to know how these lugs can be installed without welding. Do they come with bolts and instructions for drilling through the footpad. I would like to read the mounting instructions before purchasing. Thanks.

asked by: Ty

0

Expert Reply:

I attached a picture that has the install instructions for the Lippert Components JT's Strong Arm Jack Stabilizer Adaptor Lug # LC314592 that you referenced to show you how it installs. They can be welded or bolted to the feet.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Lippert Components JT's Strong Arm Jack Stabilizer Kit - Over 58" Between Landing Gear, #LC191023 can be used with the Lippert Level Up with the correct adapter, part #LC314592. I spoke with my contact at Lippert to confirm this.

view full answer...

Answer 2

Sounds like you have an auto leveling Lippert Ground Control/Level Up jack kit on your trailer. Yes, the JT Strong Arm Stabilizer System #LC191023 will work with your LCI Level Up System. I checked with Lippert and found that you can use the JT's…

view full answer...

Answer 3

The bolts for attaching the #LC314592 Jack Adapter Lugs to the landing gear pad like what's used with the #LC191023 stabilizers are actually included. They are 5/16-18 x 3/4 inch bolts.

view full answer...

Answer 4

Yes, you can use JT's Strong Arm Jack Stabilizer #LC191025 with the Ground Control or Level Up system on your trailer if you added the adapter lugs #LC314592. The adapter lugs are sold in quantities of 2. The JT's kit listed above is the…

view full answer...

Answer 5

Tri Pods do give you a major boost in stabilization, but a system like the JT Strong Arm Stabilizer Kit #LC191025 will be much more stabilizing. Why? Well you are taking your current jack and adding two separate components, creating a larger spread…

view full answer...

Answer 6

No, you need to use the Adaptor Lug #LC314592 with your round landing gear foot pad when installing the JT's Strong Arm Jack Stabilizer Kit #LC191023. The weld-on lugs will ensure the proper support and stability necessary for the stabilizer kit;…

view full answer...

Answer 7

Yes, the JT's Strong Arm Jack Stabilizer Kit #LC191023 will work with your 2016 Forest River Vengeance with the use of six Strong Arm Jack Stabilizer Adaptor Lugs #LC314592 as long as the front two landing gear legs are at least 58 inches apart.…

view full answer...

Answer 8

The Lippert Components JT's Strong Arm Jack Stabilizer Kit - Over 58" Between Landing Gear, #LC191023, will help to stabilize your Keystone Montana RL. I contacted Lippert who manufactures the Level Up system you are referring to and they…

view full answer...

Answer 9

If you have the LCI Level Up System you can use the Adapter Lugs #LC314592 with the JT's Strong Arm Jack Stabilizer Kit #LC191023 (which is the correct kit if you have 58 inches or more between the two front landing gear legs). I have added a…

view full answer...

Answer 10

Lippert Components JT's Strong Arm Jack Stabilizer Adaptor Lugs #LC314592 come 2 to a set. So for 6 jacks you would need 3 sets. If you are talking about the Lippert Components JT's Strong Arm Jack Stabilizer Kit #LC191023 you would need 1…

view full answer...

Answer 11

As long as they attach to a secure portion of the trailer frame or a crossmember that then attaches to the trailer frame the JT's Strongarm kit part #LC191023 will work fine. I'd recommend going with whichever is easiest or makes the most…

view full answer...

Answer 12

If you have the Andersen Ultimate Connection 5th Wheel Trailer Hitch System with the adapter to connect a fifth wheel king pin to the gooseneck hitch then you can use Ultra-Fab Gooseneck Trailer Tripod Stabilizer - Steel - 31" to 54" -…

view full answer...

Installation Instructions for the Lippert Components JT's Strong Arm Jack Lug # LC314592

Product Page this Question was Asked From

Continue Researching