Can JT Strong Arms be Used on Lippert Auto Leveling Trailer Jacks

Question

Question:

I have a 5th Wheel camper with auto level system on it. The front jacks are 60 inches apart. Which jt strong arms do I need to use ,and do I need any other kit for this set up ? I have a 370fl Coachman Chaparral.

asked by: Chuck B

0

Expert Reply:

Sounds like you have an auto leveling Lippert Ground Control/Level Up jack kit on your trailer.

Yes, the JT Strong Arm Stabilizer System # LC191023 will work with your LCI Level Up System.

I checked with Lippert and found that you can use the JT's Strong Arm Jack Stabilizer Kit # LC191023 with the adapter lugs # LC314592. For your LCI level up system will need a quantity of 6 adapter lugs, these are sold as a quantity of 2 on our site. The manufacture also provided me with instructions I will be sending you in a separate email.

I have linked the adapter lugs to this page for your convenience.

expert reply by: Jameson C

0

Johnny

8/1/2020

Can the JT Strongarm system be used on a 5th wheel with the Quadra Boogfoot leveling system?

Reply

Jon G.

8/11/2020

The JT's Strong Arm installs on traditional jacks with a square tube. From what I could find it looks like your Quadra Bigfoot uses round tube jacks to it won't fit.

Reply

Answer 1

I can definitely help and point you in the right direction. Both brands make a great quality air bag kit. Personally I prefer the Firestone Ride-Rite #F2709. The air bags themselves are known to be more durable than others. They can hold more PSI…

view full answer...

Answer 2

I do have a great option for you, however the B&W Companion Slider 5th Wheel Hitch #BWRVK3400 likely won't work on a flat bed truck because the gooseneck hole would be too far recessed in the bed. It's designed to fit into the hitch ball…

view full answer...

Answer 3

If you get the Out of Stroke error message on the Lippert Ground Control system, such as #LC358590, then that indicates that the jack has extended as far as it will go and cannot go any further. To clear the error you can extend all of the jacks in…

view full answer...

Answer 4

In order to recommend a replacement gearbox, I'd need to know the manufacturer and model number of your existing landing gear. I'd try operating that leg independently of the gear box if possible, which will confirm the gear box as the…

view full answer...

Answer 5

What you described is definitely a bad gear box on your Venture landing gear. So what you'll need is the replacement gear box part #LG-179015 and you'd be set! If you ever need to replace the motors too they are part number #LG-142178.

view full answer...

Answer 6

The left front jack error code ("LF) you are getting on your Lippert Ground Control System like #LC675817 can be triggered by a few different things. The first, which it seems you may have already ruled out, is that the system is for whatever…

view full answer...

Answer 7

There are a couple potential reasons why the back Lippert Power Jack #LC298707 on your trailer won't extend or retract even with the motor running. It's possible that it may have been over-extended or something internally has been stripped or…

view full answer...

Answer 8

To prevent theft of your Portable Power Watchdog Surge Protector with Bluetooth #HU97FR you can run the Master Lock Python Cable Lock #8419DPF through the metal holder on the cable (pictured below) and around the power pedestal.

view full answer...

Answer 9

Your brake lights and turn signals for each side are on one circuit. The left side turn signal and brake light is generally the yellow wire going into your trailer connector. The first thing to do is check the fuses on your tow vehicle. Next, inspect…

view full answer...

Answer 10

The 241845 actually comes back to the Replacement Heavy-Duty Landing Gear Jack Leg #LC241845 which is the replacement leg for the Ground Control 2.0 which does not have a gear repair kit available so you would need to replace the leg with a new…

view full answer...

Answer 11

The Lippert Landing Gear Leg model LCI PN241846 on your landing gear system refers to the Lippert Heavy Duty Landing Gear Master Leg #LC241846. For a repair kit that will work nicely with this leg, you can use the Lippert Lead Leg Repair Kit…

view full answer...

Answer 12

It sounds like the dead battery on your trailer may have caused a high amperage current stall error on your Lippert leveling system like the Ground Control #LC358590. What I first recommend doing is simply trying to clear the error message that keeps…

view full answer...

Can JT Strong Arms be Used on Lippert Auto Leveling Trailer Jacks

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching