What Vehicles Does Draw Tite Hitch # 75669 Fit

Question

Question:

Hi, would this fit a dodge durango?

asked by: Anthony

0

Expert Reply:

The hitch you mentioned does not fit a Dodge Durango. The # 75699 fits the following vehicles:

2011 - 2011 Jeep Grand Cherokee
2012 - 2013 Jeep Grand Cherokee excluding SRT-8
2014 - 2018 Jeep Grand Cherokee excluding SRT-8 and Diesel models
2012 - 2018 Jeep Grand Cherokee SRT-8

Let me know what year Durango you have and I'll see what hitch you'd need.

expert reply by: Jameson C

0

Answer 1

There is indeed a trailer hitch receiver which I verified with the manufacturer is a fit for your 2022 Jeep Grand Cherokee L, which is a hitch from Curt: - Curt Trailer Hitch Receiver #C97JR The #C97JR requires no drilling in your Jeep's frame to…

view full answer...

Answer 2

We have some great options for hitches for your 2022 Jeep Grand Cherokee but the Curt Trailer Hitch Receiver item #C97JR only fits the L model. I have confirmed this with Curt. I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver item #75699.…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 11

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...