Does Curt Front Hitch # C31077 Fit 2018 Nissan Titan XD Pro 4X and Allow Tow Hooks to be Kept

Question

Question:

Hi, I have a 2018 Nissan Titan XD Pro4X. Can you use the factory tow hooks with the Curt front hitch? Would it require longer mounting bolts. Thanks

asked by: Ray S

1

Helpful Expert Reply:

I reached out to the my tech fit contact at Curt and he said that there is no modification needed to install the Curt Front Mounted Hitch # C31077 to your 2018 Nissan Titan XD Pro-4X. You will remove the tow hooks for installation but then will be able to reinstall them after.

expert reply by: Jameson C

1

Answer 1

I reached out to the my tech fit contact at Curt and he said that there is no modification needed to install the Curt Front Mounted Hitch #C31077 to your 2016 Nissan Titan XD Pro-4X. You will remove the tow hooks for installation and then reinstall…

view full answer...

Answer 2

You will be able to retain the skid plate of your 2018 Nissan Titan XD with the Curt front hitch part #C31077 installed. We have confirmed this with our contact at Curt.

view full answer...

Answer 3

The Curt Front Mount Trailer Hitch Receiver #C31077 is a fit for the 2017 Nissan Titan XD but not for just the Titan model. It looks like the mounting brackets for the front mount hitches between the two trucks have been different in the past which…

view full answer...

Answer 4

Since both the Draw-Tite #65072 and Curt #C31077 front mount hitches only have a 500 lb tongue weight capacity they unfortunately won't be able to hold up under twice that much tongue weight even if you're using your 2017 Nissan Titan xD to…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Does Curt Front Hitch # C31077 Fit 2018 Nissan Titan XD Pro 4X and Allow Tow Hooks to be Kept

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching