Will Curt Front Hitch for 2018 Nissan Titan XD Allow Skid Plate to be Retained

Question

Question:

will this hitch work on my truck with out removing the skid pan

asked by: BURNEY W

0

Expert Reply:

You will be able to retain the skid plate of your 2018 Nissan Titan XD with the Curt front hitch part # C31077 installed. We have confirmed this with our contact at Curt.

expert reply by: Jameson C

0

Answer 1

I reached out to the my tech fit contact at Curt and he said that there is no modification needed to install the Curt Front Mounted Hitch #C31077 to your 2018 Nissan Titan XD Pro-4X. You will remove the tow hooks for installation but then will be…

view full answer...

Answer 2

The Curt front hitch part #C31077 that you referenced is a confirmed fit for your 2017 Nissan Titan XD and does not require any modifications including drilling to install.

view full answer...

Answer 3

I reached out to the my tech fit contact at Curt and he said that there is no modification needed to install the Curt Front Mounted Hitch #C31077 to your 2016 Nissan Titan XD Pro-4X. You will remove the tow hooks for installation and then reinstall…

view full answer...

Answer 4

The Curt Front Mount Trailer Hitch Receiver #C31077 is a fit for the 2017 Nissan Titan XD but not for just the Titan model. It looks like the mounting brackets for the front mount hitches between the two trucks have been different in the past which…

view full answer...

Answer 5

Since both the Draw-Tite #65072 and Curt #C31077 front mount hitches only have a 500 lb tongue weight capacity they unfortunately won't be able to hold up under twice that much tongue weight even if you're using your 2017 Nissan Titan xD to…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...