Where is the VIN Located on a 2001 SunnyBrook Travel Trailer

Question

Question:

Were is the vin number

asked by: Brenda M

0

Expert Reply:

Travel trailer VIN plates are normally located on the frame at the front of the trailer. It could be on the outboard side or the inboard side of the frame. I have included a picture that shows an example of a VIN plate. Yours will probably look different but it will give you a general idea of what to look for.

expert reply by: Michael H

0

click to enlarge

Answer 1

You'll want to pick up a paint for the Tandem Axle Trailer Fenders w/ Backing Plates #HP32VR that's designed for steel but that's about it. If you can find a paint that has good corrosion resistance then that would be optimal…

view full answer...

Answer 2

If the VIN was removed, you do have a couple options. First, check any documentation you received with the trailer, especially if any registration or title/bill of sale type paperwork was included. If there isn't anything like this or there…

view full answer...

Answer 3

Since the Titan Zinc-Plated Brake Actuator #T4750820 that you referenced has a weight capacity of 12,500 lbs and a tongue weight capacity of 1,250 lbs it will serve well as a replacement actuator for your application. The mounting holes are spaced…

view full answer...

Answer 4

The Titan Actuator part #T4750820 would be a great solution for replacing the GDC 120 you have on your triple axle boat trailer. It has more than enough capacity and is a very reliable actuator.

view full answer...

Answer 5

Replacement of a spindle on a trailer axle is best left to a professional installer. This is not a do-it-yourself type of project. We urge you to use a professional welder experienced in axle fabrication. Proper alignment and welding are critical…

view full answer...

Answer 6

The wiring that feeds the 12-volt accessory circuit on the 7-way trailer connector is of insufficient gauge to allow enough power to pass through to run a trailer mounted winch. The main function of that circuit would be for lighter-duty…

view full answer...

Answer 7

You would not want the brakes to lock up the wheels on your trailer. In addition to adjusting the brakes as shown in the video, you will also need to adjust your brake controller. Also, when adjusting and setting the brakes, you will want to do so…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

view full answer...

Answer 10

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 11

Each of the 86-1/2 inch axles we offer, such as the 5,200 lb Dexter Trailer Axle w/ Electric Brakes #8327816-EB and 6,000 lb part #8327826-EB have 71-1/2 inch spring centers. So what you would have to do is get new spring seats welded on at the…

view full answer...

Answer 12

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind…

view full answer...

Where is the VIN Located on a 2001 SunnyBrook Travel Trailer

Product Page this Question was Asked From

Continue Researching